Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


  • SMTnet
  • »
  • Electronics Forum
  • »
  • hello, I am looking for information on the following error message: F-MOT-MSETDYN HYDRA Z/156 / TIMEOUT... on a MY12, tell me yo

hello, I am looking for information on the following error message: F-MOT-MSETDYN HYDRA Z/156 / TIMEOUT... on a MY12, tell me yo

Views: 1405

#88755

MY12 HYDRA issu | 22 December, 2022

hello, I am looking for information on the following error message: F-MOT-MSETDYN HYDRA Z/156 / TIMEOUT... on a MY12, tell me your experience until the problem is solved

reply »

#88764

MY12 HYDRA issu | 26 December, 2022

So, your Hydra Z message timed out...

A couple of potential causes: 1. Hydra MOT card failure 2. Hydra z-motor failure 3. Hydra z-motor encoder failure 4. Hydra z-lock failure 5. Disconnected cable 6. X-wagon cable

Start by booting into service mode, and running initialization manually. See if the failure is the same.

Check the mot-card by swapping it with a known good card, and see if the issue still exists. If it does, the problem is motor side.

Make sure that the motor is turning freely, and that all cables are connected correctly.

In service mode, rotate the motor head and make sure that the encoder counts change correctly.

Make sure nothing impedes the travel of the head.

Good luck! cheers, ..rob

reply »

  • SMTnet
  • »
  • Electronics Forum
  • »
  • hello, I am looking for information on the following error message: F-MOT-MSETDYN HYDRA Z/156 / TIMEOUT... on a MY12, tell me yo
Jade Series Selective Soldering Machines

IPC Training & Certification - Blackfox