Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Electronics Forum
»
Samsung SM45FV NEO Z axis motor change

Samsung SM45FV NEO Z axis motor change

Subscribe to Thread

Views: 6181

Hello guys, we have a couple of CP45FV NEOs working for ye... - Jan 03, 2023 by Eurolan Ltd.

In newer machines, after changing a motor you have to do an ... - Jan 06, 2023 by Micropak

I have Korean CP45 service manual if you are interested. ... - Jan 17, 2023 by dbrenkus

Hi, Thanks for your reply. This machine actually doesnt ha... - Jan 17, 2023 by Eurolan Ltd.

Hello, I have several manuals in English, but not the servic... - Jan 17, 2023 by Eurolan Ltd.

I sent a link to the manual in an email. ... - Jan 17, 2023 by dbrenkus

I appreciate it, thanks for your help! ... - Jan 17, 2023 by Eurolan Ltd.

there is a special tool(cable) used to phase the motor with ... - Jan 19, 2023 by bukas

Hello, Do you have information about the part number (if a... - Jan 19, 2023 by Eurolan Ltd.

Hi guys, we managed to fix it. This tool turned out to be im... - Jun 19, 2023 by Eurolan Ltd.

If possible, I'd like that service manual, thanks. ... - Feb 20, 2024 by Erik Friesen

May I request the Service Manual ? ... - Feb 22, 2024 by Micropak

I am not sure exactly which manuals you mean. Here are the ... - Feb 22, 2024 by Eurolan Ltd.

I am not sure exactly which manuals you mean. Here are the o... - Feb 22, 2024 by Eurolan Ltd.

Thanks a Million.. ... - Feb 22, 2024 by Micropak

Thank you, there are a few more things in that service manua... - Feb 22, 2024 by Erik Friesen

Samsung SM45FV NEO Z axis motor change | 3 January, 2023

Hello guys,

we have a couple of CP45FV NEOs working for years now. Last month one of our workers managed to hit one 8mm feeder with the vision module. It was so hard that it actually broke the Z6 motor. We have found a used motor and mounted it. However it is currently unable to home itself. Any of you know if there is some kind of recalibration procedure?

Samsung SM45FV NEO Z axis motor change | 6 January, 2023

In newer machines, after changing a motor you have to do an "Axis Home Calibration". Once I changed Z-Axis belt on an SM-482 and it refused to successfully do "Axis Home Calibration. Then the solution was to remove the belt, rotate the motor pulley a little (may 10-15 degree) and install belt again and try "Axis Home Calibration"

Samsung SM45FV NEO Z axis motor change | 17 January, 2023

I have Korean CP45 service manual if you are interested.

Samsung SM45FV NEO Z axis motor change | 17 January, 2023

Hi,

Thanks for your reply. This machine actually doesnt have such a button. It can home itself, but it tries to through the whole process, and stops when trying to find Z6 zero point.

Samsung SM45FV NEO Z axis motor change | 17 January, 2023

Hello, I have several manuals in English, but not the service manual. If it is a PDF where I could eventually use Google translate would be great to have.

Actually, our friends from China sent us some videos on this, but it is not understandable - in brief it is something like that: You move the Z axis to middle, then you try to home and use something to trigger the zero-point sensor... tried but did not work out.

Samsung SM45FV NEO Z axis motor change | 17 January, 2023

I sent a link to the manual in an email.

Samsung SM45FV NEO Z axis motor change | 17 January, 2023

I appreciate it, thanks for your help!

Samsung SM45FV NEO Z axis motor change | 19 January, 2023

there is a special tool(cable) used to phase the motor with driver.

Samsung SM45FV NEO Z axis motor change | 19 January, 2023

Hello,

Do you have information about the part number (if any) and/or where we could buy one?

Thanks!

Samsung SM45FV NEO Z axis motor change | 19 June, 2023

Hi guys, we managed to fix it. This tool turned out to be impossible to find. What we did is mount the motor, mark the timing belt's position and loosen the screws that attach the timing belt to the head. This way we were able to move the position of the head relative to the motor. We moved the timing belt 3 positions each time and we were lucky to have it homing after the fourth attempt. Just in case some one comes across such problem...

Samsung SM45FV NEO Z axis motor change | 20 February, 2024

If possible, I'd like that service manual, thanks.

Samsung SM45FV NEO Z axis motor change | 22 February, 2024

May I request the Service Manual ?

Samsung SM45FV NEO Z axis motor change | 22 February, 2024

I am not sure exactly which manuals you mean. Here are the ones I have as files: https://www.eurolan.net/datasheets/cp45fvneo/

If I could somehow help you let me know. We have such a machine for over 10years.

Samsung SM45FV NEO Z axis motor change | 22 February, 2024

I am not sure exactly which manuals you mean. Here are the ones I have as files: https://www.eurolan.net/datasheets/cp45fvneo/

If I could somehow help you let me know. We have such a machine for over 10years.

Samsung SM45FV NEO Z axis motor change | 22 February, 2024

Thanks a Million..

Samsung SM45FV NEO Z axis motor change | 22 February, 2024

Thank you, there are a few more things in that service manual than I have. Really what I was looking for, and didn't find, is there any type of comp table for the ballscrew on these machines?

SMTnet
»
Electronics Forum
»
Samsung SM45FV NEO Z axis motor change

Training online, at your facility, or at one of our worldwide training centers"

IPC Certification Training from the comfort of your home or office. See our 2024 Training schedule now.

High Throughput Reflow Oven

© 1995-2024 SMTnet

convection smt reflow ovens

Now Online

60
Visitors

97
Members

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

Fluid Dispensing Aerospace

Fixate labor costs with selective soldering solutions

pcb potting