Nozzle diameter error

Subscribe to Thread

Hi, i've been struggling with register nozzles into Panasoni... - Jan 10, 2023 by klauss

Hello Klauss, please provide nozzle number you wish to regis... - Jan 10, 2023 by Linux

It's 166M.I haven't found the data provided us with nozzle s... - Jan 10, 2023 by klauss

When I see that on ours, I take the nozzle off and clean the... - Jan 12, 2023 by Chris

Doesn't work. I have 3 of them but all give the same error. ... - Jan 16, 2023 by klauss

don't have nozzle data for this nozzle. checked with panason... - Jan 16, 2023 by Linux

klauss

#88825

Nozzle diameter error | 10 January, 2023

Hi, i've been struggling with register nozzles into Panasonic & NPM machines. I determinate all the nozzle dimensions correctly but while pick and placing some error occurs and it says nozzle diameter error.

how can i fix this?

reply »

Linux

#88826

Nozzle diameter error | 10 January, 2023

Hello Klauss, please provide nozzle number you wish to register, Have you registered the nozzle data as per reference data provided with nozzle?

reply »

klauss

#88828

Nozzle diameter error | 10 January, 2023

It's 166M.I haven't found the data provided us with nozzle so I tried the measure and create the data my own

reply »

Chris

#88837

Nozzle diameter error | 12 January, 2023

When I see that on ours, I take the nozzle off and clean the tip. Any build up and the machine throws that error. Do a set check on the head and then look at the image of the nozzle in question...OR we hit resume and the machine ignores it until the next startup.

reply »

klauss

#88843

Nozzle diameter error | 16 January, 2023

Doesn't work. I have 3 of them but all give the same error. If you have similiar nozzle with 166M could you share me their data?

reply »

Linux

#88848

Nozzle diameter error | 16 January, 2023

don't have nozzle data for this nozzle. checked with panasonic no data available

reply »