An error occurred during origin return.

Subscribe to Thread

Does anyone know what this error is? Title: Origin Return Er... - May 03, 2025 by mrprice

What machine is this? From the wording, it sounds like the ... - May 06, 2025 by DWL

Juki jx-100 I replaced the Z1 axis cable and plugged it in. ... - May 06, 2025 by mrprice

mrprice

#91976

An error occurred during origin return. | 3 May, 2025

Does anyone know what this error is? Title: Origin Return Error

Message: An error occurred during origin return. : Error – unable to return to origin. Please turn off the power.

Details: : Servo alarm (20 – encoder abnormality) Abnormality 2: Communication failure between encoder and AMP

reply »

DWL

#91982

An error occurred during origin return. | 6 May, 2025

What machine is this?

From the wording, it sounds like the encoder isn't sending position data to the amplifier. Check the encoder, the wiring and the amplifier. If you have the same parts on a different axis or machine, you can try swapping them 1 by 1 and see if the issue follows. If so, you found the culprit.

reply »

mrprice

#91983

An error occurred during origin return. | 6 May, 2025

Juki jx-100 I replaced the Z1 axis cable and plugged it in. The device worked fine. But then I turned it off and on again and it gave the error. It worked fine for a while but then it gave the error again.

reply »