Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Going, going, gone, but back

Earl Moon

#15427

Going, going, gone, but back | 15 June, 1998

I'm off (as you all know) to other pastures. You know - sheep tupping on the green (or some other Elizabethan BS). Anyway, I now have to go to work for a living, or retire (don't remember which), to make a living. Deeply invloved in micro BGA, CBGA, and CCGA (dfferent names, same players) and have to get back to bare boards (HDI stuff) so you may assemble them without solder mask or solderability issues. Promise not to give up the solderabilty issue. I'll keep track - especially Justin, Wayne, Dave, Steve, John, Earl (that's me) and all the rest on this - the best forum on the planet - though you probably suck on Mars. Earl Moon

reply »

Sherry

#15432

Re: Going, going, gone, but back | 16 June, 1998

Going, going, gone, but back? It must be early, this post is quite confusing, ok I'm having a blonde moment. Sounds like you're going to be quite busy, I wish you well! Also, wanted to let you know...my email has been down Once they get it operational again, I'll pass that information to you on demoisturizing pcb's. See ya!

| I'm off (as you all know) to other pastures. You know - sheep tupping on the green (or some other Elizabethan BS). Anyway, I now have to go to work for a living, or retire (don't remember which), to make a living. | Deeply invloved in micro BGA, CBGA, and CCGA (dfferent names, same players) and have to get back to bare boards (HDI stuff) so you may assemble them without solder mask or solderability issues. Promise not to give up the solderabilty issue. | I'll keep track - especially Justin, Wayne, Dave, Steve, John, Earl (that's me) and all the rest on this - the best forum on the planet - though you probably suck on Mars. | Earl Moon

reply »

Justin Medernach

#15431

Re: Going, going, gone, but back | 16 June, 1998

| I'm off (as you all know) to other pastures. You know - sheep tupping on the green (or some other Elizabethan BS). Anyway, I now have to go to work for a living, or retire (don't remember which), to make a living. | Deeply invloved in micro BGA, CBGA, and CCGA (dfferent names, same players) and have to get back to bare boards (HDI stuff) so you may assemble them without solder mask or solderability issues. Promise not to give up the solderabilty issue. | I'll keep track - especially Justin, Wayne, Dave, Steve, John, Earl (that's me) and all the rest on this - the best forum on the planet - though you probably suck on Mars. | Earl Moon As they say in the urban sprawl, "Peace out." Good luck with the new/old endeavors. Keep in touch. Sincerely, Justin Medernach

reply »

Steve Gregory

#15433

Re: Going, going, gone, but back | 16 June, 1998

| Going, going, gone, but back? It must be early, this | post is quite confusing, ok I'm having a blonde moment. Earl, I'm not blonde, but I guess those kinda' moments are catching...'cause I think (as much as I hate to admit it) I'm having one too. What the heck are ya' talking about? You splittin' some place? Confusingly, -Steve-

reply »

Wayne

#15428

Re: Going, going, gone, but back | 16 June, 1998

| I'm off (as you all know) to other pastures. You know - sheep tupping on the green (or some other Elizabethan BS). Anyway, I now have to go to work for a living, or retire (don't remember which), to make a living. | Deeply invloved in micro BGA, CBGA, and CCGA (dfferent names, same players) and have to get back to bare boards (HDI stuff) so you may assemble them without solder mask or solderability issues. Promise not to give up the solderabilty issue. | I'll keep track - especially Justin, Wayne, Dave, Steve, John, Earl (that's me) and all the rest on this - the best forum on the planet - though you probably suck on Mars. | Earl Moon

Good luck Earl, don't worry Steve is a bit slow, but he will catch on shortly... retirement sounds really good if it includes golf, fishing and a sport car.....soon for me! (?) Wayne

reply »

Steve Gregory

#15429

Re: Going, going, gone, but back | 16 June, 1998

| | I'm off (as you all know) to other pastures. You know - sheep tupping on the green (or some other Elizabethan BS). Anyway, I now have to go to work for a living, or retire (don't remember which), to make a living. | | Deeply invloved in micro BGA, CBGA, and CCGA (dfferent names, same players) and have to get back to bare boards (HDI stuff) so you may assemble them without solder mask or solderability issues. Promise not to give up the solderabilty issue. | | I'll keep track - especially Justin, Wayne, Dave, Steve, John, Earl (that's me) and all the rest on this - the best forum on the planet - though you probably suck on Mars. | | Earl Moon | | Good luck Earl, don't worry Steve is a bit slow, but he will catch on shortly... | retirement sounds really good if it includes golf, fishing and a sport car.....soon for me! (?) | Wayne Hey Wayne! Just 'cause I experimented with way too much LSD in the 60's, huff Toulene and airplane glue on a daily basis, and mainline prozac in my jugular, don't mean I'm slow...I'm just r-e-l-a-x-e-d. (GRIN) I think I figured it out...Earl is not really going bye-bye, he's going to work on a consulting job, right?...and he may not be up on a regular basis, right? -Steve-

reply »

wayne

#15430

Re: Going, going, gone, but back | 17 June, 1998

| Hey Wayne! | Just 'cause I experimented with way too much LSD in the 60's, huff Toulene and airplane glue on a daily basis, and mainline prozac in my jugular, don't mean I'm slow...I'm just r-e-l-a-x-e-d. | (GRIN) | I think I figured it out...Earl is not really going bye-bye, he's going to work on a consulting job, right?...and he may not be up on a regular basis, right? | -Steve- Gee Steve you are quick.....Just having a bit of fun, know I need something. All we have had for the past week and week to follow is RAIN. If I didn't know better I would think we are in the Northwest not east. We don't shake like you guys in California, but this rain is a bit too much. Wayne

reply »

High Throughput Reflow Oven
Benchtop Fluid Dispenser
ICT Total SMT line Provider

Cost-effective Conformal Coating Machine