Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Fuji CP3 and 2mm pitch tape

Tony

#22998

Fuji CP3 and 2mm pitch tape | 14 January, 2003

I found a feeder with a 2mm pitch and was told that although it was made for the CP4, it would work with the CP3.

Before we throw out a thousand bucks, has anyone had experience loading parts off of a 2mm pitch tape with the CP3?

The part is a 1.6 mm square resistor pack.

reply »

fujispares

#23005

Fuji CP3 and 2mm pitch tape | 14 January, 2003

Hi, CP3 will have trouble placing 0603 parts - I wouldn`t use a CP3 for these parts - A CP4 will be more suitable. A older CP4 feeder will fit and function on a CP3.

This message was posted via the Electronics Forum @

reply »

Cost-effective Conformal Coating Machine

One stop service for all SMT and PCB needs