Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

PCB Surface Finish

Which is the best surface finish to be used on non- solder m... - Jun 19, 2003 by Murtuza  

Most of the BIG board fabs give comparisons, like you seek, ... - Jun 19, 2003 by davef  


Murtuza

#24882

PCB Surface Finish | 19 June, 2003

Which is the best surface finish to be used on non- solder mask defined pads in terms of cost and reliability? What are the advantages and disadvantages of the various surface finishes such as Ni/Au , Cu OSP , Ni /Pd and HASL.

reply »


davef

#24903

PCB Surface Finish | 19 June, 2003

Most of the BIG board fabs give comparisons, like you seek, on their sites. For instance: http://www.merix.com/main_res.html

We have no relationship nor receive benefit from the company referenced in the above link.

Finally, consider immersion tin and immersion silver in addition to the finishes you mentioned.

reply »

One stop service for all SMT and PCB needs
pressure curing ovens
Now Online
62
Visitors
223
Members

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

Fluid Dispensing Aerospace
convection smt reflow ovens
Encapsulation Dispensing, Dam and Fill, Glob Top, CSOB

Void Free Reflow Soldering