Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Electronics Forum
»
Universal 4796 rear LCD touchscreen monitor

Universal 4796 rear LCD touchscreen monitor

Subscribe to Thread

Has anybody had to replace the rear LCD monitor on a 4796 HS... - Oct 24, 2003 by

If it's the same as the HSP 4790 and or 4791 I have one in s... - Oct 26, 2003 by Fastek

Don't know which year 's machine you got, the touch screen m... - Oct 26, 2003 by Frank Lam

We have a 4796A (1988) and a 4796B (1999) and have been able... - Oct 27, 2003 by

Bill- Send me an e-mail to ... - Oct 27, 2003 by Fastek

We had the same problem recently. It turned out the power s... - Oct 28, 2003 by

Thanks for the help ---one of our test techs checked the pow... - Oct 28, 2003 by

Back to square one, is your monitor physically damaged or is... - Oct 29, 2003 by Frank Lam

Has anyone tried aa alternate manufacturer or model to repla... - Dec 11, 2003 by

Bill

#26154

Universal 4796 rear LCD touchscreen monitor | 24 October, 2003

Has anybody had to replace the rear LCD monitor on a 4796 HSP chipshooter? Universal is quoting 10k (!) for a new one as they are hard to locate. Patlite (the LCD manufacturer) has discontinued the unit GSC-1000ARS-W and is unable to help.

If anybody knows of a direct compatible unit we would sure appreciate it.

Thanks in advance, Bill

reply »

Fastek

#26174

Universal 4796 rear LCD touchscreen monitor | 26 October, 2003

If it's the same as the HSP 4790 and or 4791 I have one in stock.

reply »

Frank Lam

#26175

Universal 4796 rear LCD touchscreen monitor | 26 October, 2003

Don't know which year 's machine you got, the touch screen monitor came with a computer control card. I think you have no choice and to go with Universal.

reply »

Bill

#26177

Universal 4796 rear LCD touchscreen monitor | 27 October, 2003

We have a 4796A (1988) and a 4796B (1999) and have been able to swap them (rear LCD touchscreen) to isolate to the monitor.

Thanks again, Bill

reply »

Fastek

#26183

Universal 4796 rear LCD touchscreen monitor | 27 October, 2003

Bill-

Send me an e-mail to fastek@attbi.com and I will send you a picture of my monitor. Hopefully it is the same as yours.

Rick

reply »

Gary Camac

#26189

Universal 4796 rear LCD touchscreen monitor | 28 October, 2003

We had the same problem recently. It turned out the power supply had a problem. We sent the supply out for repair, but it couldn't be fixed. We found a replacement supply for around $250 that required the drilling of some new mounting holes. This was a Condor model GLC65A supply, but others would likely work. It has been working fine for a couple of months. But, even if it goes again I can buy a pile of them for the cost of a new display from UCI

reply »

Bill

#26195

Universal 4796 rear LCD touchscreen monitor | 28 October, 2003

Thanks for the help ---one of our test techs checked the power supply and it reportedly is good.

Thanks again, Bill

reply »

Frank Lam

#26206

Universal 4796 rear LCD touchscreen monitor | 29 October, 2003

Back to square one, is your monitor physically damaged or is it mulfunctioned? Try the local monitor repairing tech's, may give u a surprise. We had the one at the front panel fixed by a local repairing guy here,(cheap $75). It works.

reply »

Mike A

#26568

Universal 4796 rear LCD touchscreen monitor | 11 December, 2003

Has anyone tried aa alternate manufacturer or model to replace the Patlite monitor

reply »