TDK RX11 Machine

Subscribe to Thread

Any one know about TDK RX11 machines? I have a servo proble... - Dec 01, 2003 by M S

Sory for you, I made my experiences at Siemens Fuji and Pan... - Dec 02, 2003 by

Basically the problem detail is, can't read the encoder read... - Dec 03, 2003 by M S

Hi Marco, most likely your axis has two limit switches and ... - Dec 04, 2003 by Stefan Witte

What error message are you getting with your C Axis problem?... - Dec 09, 2003 by

Found a PLC output missing (PLC damage) machine O.K. Thanks... - Dec 15, 2003 by M S

M S

#26468

TDK RX11 Machine | 1 December, 2003

Any one know about TDK RX11 machines? I have a servo problem with "C" axis. I'll apreciate any one help! Tks! M.S.

reply »

ex maintain leader

#26470

TDK RX11 Machine | 2 December, 2003

Sory for you, I made my experiences at Siemens Fuji and Panasonic, but describe your problem please more detaied.

reply »

M S

#26497

TDK RX11 Machine | 3 December, 2003

Basically the problem detail is, can't read the encoder reader from the motor, I swap the servo pack, the controler cards from the pc, the output cards from the plc, the motor and still have the problem!

reply »

Stefan Witte

#26502

TDK RX11 Machine | 4 December, 2003

Hi Marco, most likely your axis has two limit switches and possibly a home sensor. Limit switches are NC and in case of bad connection or wire break the axis will not move, no matter how many cards you swap.

reply »

Michael N

#26543

TDK RX11 Machine | 9 December, 2003

What error message are you getting with your C Axis problem? Check the battery pack on the right hand side in the front it seems to me that probaly your losing your data. BE CAREFUL NOT TO REMOVE THE BATTERY WHEN THE MACHINE IS OFF, IF NOT YOU'LL HAVE TO RETEACH ALL YOUR FLOATING ORIGIN DATA..(learned that from experience)

reply »

M S

#26605

TDK RX11 Machine | 15 December, 2003

Found a PLC output missing (PLC damage) machine O.K. Thanks to all involved!

reply »