Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Electronics Forum
»
smt basics

smt basics

Subscribe to Thread

hello, I am from india.. we actually manufacture e... - Apr 29, 2004 by Carole

Depends how much money you have in your budget. You have to... - Apr 29, 2004 by CC to myself

Try getting a small contract manufacturer who will build the... - May 03, 2004 by

Hi, It depends of your boards(are they for SMD or not) and ... - May 04, 2004 by

hi in which part of india are you we are in contract manfact... - May 05, 2004 by

This all the things depends upon your requirement. Can yo... - May 06, 2004 by MSK

I can help you, if define what type of components you used: ... - May 06, 2004 by

hi friend, i am also from india, i will suggest you to con... - May 07, 2004 by

Carole

#28314

smt basics | 29 April, 2004

hello, I am from india.. we actually manufacture electronic ballasts/chokes.. but till now the whole process is manual. We need to automize the process. What essential equipments would we require initially??

akbar

reply »

CC to myself

#28316

smt basics | 29 April, 2004

Depends how much money you have in your budget. You have to break down your assembly into the different components and figure out what can be done by machine and what can't. Then search for machine that can do the jobs. There are consultant firms that can do that for you. Search for industrial consultant.

reply »

Kris

#28374

smt basics | 3 May, 2004

Try getting a small contract manufacturer who will build the boards for you initialy

that way you can learn untill you establish the process

once you do that you can have a fair idea of what machines to buy ? where to buy ?

or maybe if the volumes are good you might be even able to get the CEM do it for you

reply »

Evtimov

#28383

smt basics | 4 May, 2004

Hi, It depends of your boards(are they for SMD or not) and how many boards you assemble. The process at all is like that: 1.Stencil printer - to adjust the paste 2. Pick and place machine(for your quantity) 3.Reflow oven Theese are the machines you have to buy. How many boards you think you will assemble monthly? If 1 million or less you can buy machine wich place 3000-6000 components per hour.It could be even second hand, but I don't recomend you such machine, becouse you are new in the field and you will need you support and warranty. The printer and the reflow you could buy more simple(if you don't use very precise or very small components 0201 or LLGA ...). If you place much more than 1 million ...you will know what to do.Make a research on the market. Advice with firms. Ask everybody. If you have more questions call me. good luck!

reply »

dhanashekar

#28401

smt basics | 5 May, 2004

hi in which part of india are you we are in contract manfactures we can help you to begin we can have the faclity to give you the reqired quanity if you want any questions please email id skandaae@vsnl.net we ar e located in bangalore thanks dhanashekar

reply »

MSK

#28424

smt basics | 6 May, 2004

This all the things depends upon your requirement.

Can you please answer the following things 1.How may components in one board. 2.How many types of components also tell the packages also if you know. 3.What quantity per month/Year you want to produce. 4.Are you planning to change some more models into SMT or in near future if you are going to launch some more types of boards in SMT. If you have the detail then the answer will more clear to you.If you wat some more crarification on SMT then mail on

mskler@rediffmail.com

reply »

MSK

#28425

smt basics | 6 May, 2004

This all the things depends upon your requirement.

mskler@rediffmail.com

reply »

gustavo

#28453

smt basics | 6 May, 2004

I can help you, if define what type of components you used: Thru hole(axial,radial, pin insertion etc..) axial: milimetrics or standar(span of .200" or .350" ) radial 2.5mm , 5mm or 7.5 mm SMT (chip shooter(1206,0805,0603 ,sot 23 etc or more small ) or fine pitch IC's, BGA etc)? your board required double reflow or aplication of glue in bottom ? Your board design is ready for automatic process?

regard

This message was posted via the Electronics Forum @

reply »

ravi

#28464

smt basics | 7 May, 2004

hi friend, i am also from india, i will suggest you to contact to emst technologies pvt ltd. tel.no is --020-24332898/24330192. those people are having all types of m/cs.

i think this is information is enough.

all the best for new line.

reply »