Mydata Line Scan

Subscribe to Thread

We have an older line scan camera on our MY series machine.(... - May 13, 2004 by Sr. Tech

What, no answers from Mydata tech support? 978-948-7378. ... - May 13, 2004 by PeteC

Hahaha.....I knew that was coming. I have worked with Myd... - May 13, 2004 by Sr. Tech

Yep, figured that. Just thought I'd ask the question anyway.... - May 13, 2004 by PeteC

Roger that. ... - May 13, 2004 by Sr. Tech

Mydata's tech support is iffy, at best. The techs are ok (sl... - May 13, 2004 by

This could be a dirty glass scale. alignment or gap. step ... - May 25, 2004 by

Sr. Tech

#28582

Mydata Line Scan | 13 May, 2004

We have an older line scan camera on our MY series machine.(The one that uses the X wagon trigger/encoder to turn on the line scan)When I go into the service program and turn the line scan camera to "camera action on" the LED's will only stay lit for a short period, then the shut off. I have replaced the line scan power supply and the LSAD board to no avail.

Has anyone ever encountered this before ?

reply »

PeteC

#28585

Mydata Line Scan | 13 May, 2004

What, no answers from Mydata tech support? 978-948-7378.

reply »

Sr. Tech

#28586

Mydata Line Scan | 13 May, 2004

Hahaha.....I knew that was coming.

I have worked with Mydata tech support for quite some time on this issue. They want me to start replacing more and more hardware.

I just went on the whim that maybe someone else out there has seen this specific problem.

reply »

PeteC

#28588

Mydata Line Scan | 13 May, 2004

Yep, figured that. Just thought I'd ask the question anyway. That is the issue, all the parts they send to troubleshoot will be billed. A field service engineer on the other hand can request all the parts and you'll only be billed for what fixed the problem. The other parts will be returned at no charge.

reply »

Sr. Tech

#28589

Mydata Line Scan | 13 May, 2004

Roger that.

reply »

Longhua

#28594

Mydata Line Scan | 13 May, 2004

Mydata's tech support is iffy, at best. The techs are ok (slow as hell...) But they are trying to turn the servicing into a profit center...a $2000.00 PO just to come in the door???? The machines are quirky, too...

reply »

smokejumper

#28768

Mydata Line Scan | 25 May, 2004

This could be a dirty glass scale. alignment or gap. step one clean the glass scale. if the number changes 1 - 0 when you move the head it is probably an aligment or gap issue.

reply »