Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Air-Vac DRS24

#29930

Air-Vac DRS24 | 6 August, 2004

I am looking to buy an used Air-Vac DRS 24. Does anyone has experience with it? What do I need to look for and what different between the 24 and 24C? Thanks for your help. -Michael

reply »

C Lampron

#29948

Air-Vac DRS24 | 9 August, 2004

Michael,

We have a DRS-24 and are very happy with it. Look at the wobble in the nose cone that holds the nozzles and make sure it does not move. This will degrade your placement acuracy. The machine is very process oriented meaning that you can not set up a program where you can hit the footswitch to end a thermal cycle. This needs to be set up in the program. Other than that, the machine has met our needs well. I'm not familiar with the DRS-24C so I'm not sure what the diffences are.

Chris

reply »

Ramon Urrutia

#35551

Air-Vac DRS24 | 15 July, 2005

We are Global Sourcing Specialists Ltd, buyers and exporters of redundant stock. We have a Zevac DRS 24 and 22 for sale if you are interested. Please contact ramon.urrutia@btconnect.com or ring/fax:4401291423861 Both machines are in good working order and are all clean and spotless. Thank You

Ramon Urrutia

reply »

GS

#35582

Air-Vac DRS24 | 15 July, 2005

It seams differences should be: - C has embedded Control and SW,more compact. - the 24 has the external PC with all the profile date and control. I heard that 24C his less flxible and friendly to use then 24.(Not sure) Mechanically they should be similar.

Regards GS

This message was posted via the Electronics Forum @

reply »

IPC Training & Certification - Blackfox

One stop service for all SMT and PCB needs