IPII v.s IPIII

Jerry, Contact FujiAmerica and ask for their newest product Guide. Some differences are..... IP2 - SMD1 vision (back lighting only, coplanarity check optional) IP3 - SMD3 vision (back, front, coplanarity check optional) IP3 - BGA transport, IP2 can't transport BGA from MTU without some modification which won't come from Fuji IP3 - Mechanical chucks, places most any odd form part. IP2 - forget it. IP3 - programable placement pressure IP3 faster placement speeds, placement accuracy +-.01mm for chips (same as IP2), +-.025mm for 4side leaded parts vs +-.05mm on IP2. IP3 - up to 24 nozzles Both use the same feeders, both offer MFU's for quick changeover, both hold the same amount of feeders.

Hope this helped a little, good luck. Micah

reply »