Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

Press Fit

Can anyone advise how to determine the right hole diameter f... - Apr 03, 2005 by

Look here: * ... - Apr 04, 2005 by davef  

the pin manufacturer usually recommends the proper hole size... - Apr 04, 2005 by

Haran

#33503

Press Fit | 3 April, 2005

Can anyone advise how to determine the right hole diameter for a Press Fit connector's lead based on the lead compliant section?

reply »


davef

#33521

Press Fit | 4 April, 2005

Look here: * http://www.assemblymag.com/CDA/ArticleInformation/features/BNP__Features__Item/0,6493,140679,00.html

* http://www.circuitree.com/CDA/ArticleInformation/features/BNP__Features__Item/0,2133,136322,00.html

reply »

jimih280

#33522

Press Fit | 4 April, 2005

the pin manufacturer usually recommends the proper hole size. the hole diameter should be from .001" to .003" undersize depending on the design of the contact area on the pin.

reply »

Large PCB Dispensing System
Jetting Pump for Integration
Now Online

46
Visitors

2
Members

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

SP710avi inline smt screen printer
SMT Reflow Ovens
Flexible pick & Place

Selective Conformal Coating System