Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


How to control and purchase the ESD at production floor

Views: 1908

#37774

How to control and purchase the ESD at production floor | 10 November, 2005

I want to implement total ESD at my production floor but right now I got problem to get the ESD material and also I don't have the actual spec guideline for implementation.

reply »

#37797

How to control and purchase the ESD at production floor | 10 November, 2005

The recommended electrical resistance for flooring from ANSI ESD S 7.1 and ANSI/ESD-S20.20 is <1x10^9 ohm RTT [resistance between two points]. This starts from the upper dissipative range, but can include the conductive range. The conductive range is less than 1x10^4 ohms (so 9x10^3 ohms is conductive). Over 1x10^4 ohms (to 9x10^10) is considered dissipative.

Installed cost of poured epoxy at $14 to $18 per sq. ft. and tile at $6 to $8 per sq.ft.

reply »

#37798

How to control and purchase the ESD at production floor | 10 November, 2005

Background * The Facilities Manager�s Guide To ESD Flooring Materials http://www.conformity.com/0311the.pdf

* Taking The Mystery Out Of Selecting ESD Flooring http://www.conformity.com/0212taking.pdf

reply »

Software for SMT

See Your 2024 IPC Certification Training Schedule for Eptac