Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Nicolet X-ray

Views: 2208

RLM

#43441

Nicolet X-ray | 21 August, 2006

I have a chance to purchase a used Nicolet X-ray machine. I would like to get some feedback from other users of this machine. Thanks in advance.

Nicolet NXR-1410i vintage 1998

reply »

cuculi54986@yahoo.com

#43444

Nicolet X-ray | 21 August, 2006

I don't know anything about your machine, except that Nicolet was purchased by VJ Electronix.

I contacted VJ about another model of Nicolet X-ray machine, and Rick (978-425-9446 ext. 1251) gave me some good information. He's a former employee of Nicolet.

reply »


Rob

#43445

Nicolet X-ray | 21 August, 2006

We sold ours a few years back - it was adequate, but nothing great. It was only top down, not one of these wonderful tilt & view at any angle machines, but it did a job for us. We never had any BGA related problems as we had very good engineers, so it was only used on first offs.

Obviously you will have to notify the appropriate people and have the relevant inspections as it is a radioactive source.

Cheers,

Rob.

reply »

Gary

#43460

Nicolet X-ray | 21 August, 2006

Watch out for the tube and camera. Tubes are over $20K and cameras can go over $15K. There are no reputable service suppliers for these. If you want a good refurbished machine with warranty call Rework,Inc. 760-458-0733.

Gary

reply »

Software for SMT

SMT Feeders