0402 placement using Quad 4C

Subscribe to Thread

If anyone is placing 0402 components using a Quad 4C I woul... - Mar 07, 2001 by MGL

Get another machine poopdick ... - Mar 13, 2001 by

We have a 4C and it places 0402 components without any probl... - Mar 13, 2001 by Jacob

Try calling Quad, I know that they were in development of a ... - Mar 13, 2001 by

As long as you perform a repeat pickup on the part with an o... - Mar 13, 2001 by Jacob

I place 0302's on my Quad 4c's all the time. Use a repeat pi... - Mar 15, 2001 by rentreo

Tyco has recently completed development work on the ThinPRO ... - Feb 27, 2002 by

MGL

#5490

0402 placement using Quad 4C | 7 March, 2001

If anyone is placing 0402 components using a Quad 4C I would like to hear any tips or advise. We have a job that is loaded with them.

reply »

LSMITH

#5539

0402 placement using Quad 4C | 13 March, 2001

Get another machine poopdick

reply »

Jacob

#5540

0402 placement using Quad 4C | 13 March, 2001

We have a 4C and it places 0402 components without any problems. The tricky part is getting the machine to pick them up out of the feeder it takes patience but you will get it. jake p.s. you must use a repeat pickup so you wont have a ton of fallout.

reply »

Simply Anonymous

#5541

0402 placement using Quad 4C | 13 March, 2001

Try calling Quad, I know that they were in development of a feeder designed specifically for 0402. The problem has always been the pick of such a small part, but the placement is very reliable.

By way, have you heard that Quad is being purchased by Tyco!! Hopefully this puts them back on track.

reply »

Jacob

#5542

0402 placement using Quad 4C | 13 March, 2001

As long as you perform a repeat pickup on the part with an ordinary feeder you will be fine.

reply »

rentreo

#5597

0402 placement using Quad 4C | 15 March, 2001

I place 0302's on my Quad 4c's all the time. Use a repeat pick-up just like a waffle tray part but make sure the z height is perfect on your pick-up or you will bounce the other parts out of their pockets. Also change your mod code to only try once otherwise the blow-back will blow them out of their pocket. Good luck.

reply »

stmerkt

#18994

0402 placement using Quad 4C | 27 February, 2002

Tyco has recently completed development work on the ThinPRO feeder. This feeder provides exceptional performance for 0201 and 0402 applications. The feeder is compatable with the IV-C, QSV, QSX, QSP-2, and APS platforms.

reply »