Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


0201 placement by Fuji CP643 Machine

Views: 2271

#80768

0201 placement by Fuji CP643 Machine | 26 July, 2018

Hi, I want to place 0201 components by Fuji-CP643 Machine. Guide me.

Thx, Nagesh

reply »

#80772

0201 placement by Fuji CP643 Machine | 26 July, 2018

Load part on 0201 feeder

Install .4mm nozzles in machine

Load program and press start button.

Feeders, nozzles and machine must be within factory specifications.

reply »

#80778

0201 placement by Fuji CP643 Machine | 27 July, 2018

Answering silly questions like "How do I place 0201 components with machine which can't handle smaller than 0402 components" just would encourage the noob to ask more silly questions.

reply »

#80779

0201 placement by Fuji CP643 Machine | 27 July, 2018

CP643 does place 0201s. CP6 was limited to 0402. At the turn of the millenium most 0201's were being placed by Fuji's or Pana's.

reply »

#80780

0201 placement by Fuji CP643 Machine | 27 July, 2018

Just found my notebook from the late 90's, 643 confirmed 0201 from the factory, 642 needed the upgraded camera from the 643.

reply »

#80783

0201 placement by Fuji CP643 Machine | 27 July, 2018

CP643 does place 0201's.

Like I said everything has to be perfect or expect mediocre results at best.

When working with smaller parts Fuji CP machines are very picky about table level, part height, and mechanical pick and place parameters.

reply »

Industry 4.0 Reflow Oven

Fluid Dispense Pump Integration