Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Mydata MY9 - US to UK conversion

Views: 1171

#83858

Mydata MY9 - US to UK conversion | 3 December, 2019

We have purchased a Mydata MY9 from the US to use here in the UK. Does any know the how to convert the power configuration plugs? I have a L-029-0296 fitted but believe I need a L-029-0295 for the UK, it appears to be just a set of links but I do know the correct configuration for the UK. Also the EPT has similar linking plugs for 210V and I need to know which links are required for 230V. Can anyone advise please

reply »

#83901

Mydata MY9 - US to UK conversion | 6 December, 2019

If all else fails ... Mycronic Ltd., Unit 2, Concept Park, Innovation Close, Poole, Dorset, BH12 4QT, Tel: +44 1202 723 585 Fax: +44 1202 723 269

reply »

#83902

Mydata MY9 - US to UK conversion | 6 December, 2019

Thanks Dave, I have already called and was told to fill in an online enquiry to the technical department and I am yet to get a reply :(

reply »

#85896

Mydata MY9 - US to UK conversion | 11 November, 2020

An update. I managed to resolve the issue by wiring my own :) got a friend with a UK spec MY12 to take pics of the internal connections of theirs and then hard wired ours to match - worked perfectly. message me if you have a similar problem and I can send the drawings to enable you to do the same.

reply »

#85950

Mydata MY9 - US to UK conversion | 1 December, 2020

I'm intrigued at the relative costs of importing a MY9 from the US vs just buying an MY9/12/15 here in the UK where they are available pretty much all the time. We must be approaching the point where we see an influx of MY100 generation machines onto the 2nd user market too, just as we seem to have reached the point TP machines have basically vanished.

reply »

Flexible pick & Place

FPC* - Fluid Pressure Control - Dispensing Pump