Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Juki 2060 internal conveyor stopped working

Views: 1720

#88649

Juki 2060 internal conveyor stopped working | 21 November, 2022

The internal conveyor stopped working...won't take board in. Says there is a board inside machine...is it a sensor problem? Any suggestions? Nothing led up to this. Just started machine up after weekend, and it will not take the board in.

reply »

#88656

Juki 2060 internal conveyor stopped working | 23 November, 2022

You should be able to check the sensor, most had have the red light to indicate that a PCB is being detected. Depending on the version of software it should tell you within the manual control option too

reply »

#88657

Juki 2060 internal conveyor stopped working | 23 November, 2022

Is there an IO screen so you can see what sensors are tripped?

reply »

#88659

Juki 2060 internal conveyor stopped working | 24 November, 2022

The bottom piece of the sensor broke, and it threw it off, fixed now. Wasn't sure, it must have come loose enough to throw it off, but not enough to trigger an error that it wasn't working...because it was still in the casing

reply »

Jade Series Selective Soldering Machines

IPC Training & Certification - Blackfox