Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

Ablebond 8360

Kiet D


Ablebond 8360 | 17 February, 1999

I'm qualifying Ablebond 8360 from Ablestik for hybird circuit assembly. Anyone has experience with this epoxy. In my preliminary experiment with this epoxy, I had a seperation problem with a 30 gauge needle which we are using for dispensing 84-1LMIS. I talk to Ablestik technical support and they suggested to use a 28 gauge needle to avoid particle glomeration which leads to clog the needle and cause separation.I tried a 27 gauge needle; however, I occasionally experience some seperation. We're using MRSI 170 auto dispenser. Thanks for any help. -Kiet.

reply »

fluid dispensing pumps for integration

Ecolloy Soldering Alloy