touch-up board

I'm trying to find a source for a tilt device for use when doing touch-up soldering. Employee needs to raise the board above standard bench height for better access to the board and for better posture. Angle of the tilt device should be adjustable; left-right rotation would also be a good feature.

reply »

| I'm trying to find a source for a tilt device for use when doing touch-up soldering. Employee needs to raise the board above standard bench height for better access to the board and for better posture. Angle of the tilt device should be adjustable; left-right rotation would also be a good feature. | John:

Take a look at the GWS workbenches sure they will have an option that will fit your present benches and provide your operators with the proper tilt.

Wayne

reply »

| I'm trying to find a source for a tilt device for use when doing touch-up soldering. Employee needs to raise the board above standard bench height for better access to the board and for better posture. Angle of the tilt device should be adjustable; left-right rotation would also be a good feature.

John, I think you might just need a Panavice. It's just a board holder that is multi directional. Way simple and used by everyone. I will give you a link to a distributer that has them . Keeping in mind that you can just about get one from any distributer but these guys have lots of other cool stuff as well.The cost is about 70.00$ CIRCUIT TECHNOLOGY CENTER INC. www.circuitnet.com. Phone (978)374-5000. Be sure to ask them for their free standards cd.It's really good. I hope that helps. .............Jeff Sanchez

reply »