Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

Vacuum Nozzles

M.L. Feather


Vacuum Nozzles | 10 June, 2004

Is there a way to have one nozzle on the HSP Chipshooter 4796 to use a higher force of vacuum than the other nozzles? For instance, an 8x4 embossed feeder has components that are wedged hard into the plastic and cannot be pulled out with regular vacuum causing some components to come out sideways or not at all. Thanks

reply »


Vacuum Nozzles | 11 June, 2004

If you have components wedged in tape pockets, you need to contact your component supplier and tell them that you need new parts taped properly. We see this happen every now and then.

reply »

best reflow oven

Reflow Oven