Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

Off Line Programming

Miguel Lizarraga


Off Line Programming | 9 June, 2000


Is there a way to program off Line an orion PHILIPS smt machine ?

How ?

Thank you

reply »

Mark Charlton


Re: Off Line Programming | 12 June, 2000


Ask your Philips salesman or local representative for a copy of the VIOS software configured to run on a stand-alone PC AND a hardware key. With this software, you are basically programming your machine at your desk as long as you have CAD data or some other source of X-Y centroids.


reply »

Travis Slaughter


Re: Off Line Programming | 12 June, 2000

Philips would not let loose of the standalone VIOS when I asked but they do have offline programming software. I was running the OS2 version but there was supposed to be a NT version coming out last year.

reply »

Steve Skinner


Re: Off Line Programming | 13 June, 2000

The best offline software I have come in contact with is CircuitCam. Go online at or send an email to

You can use cad, a scanned image, D256 data or gerber files. Check them out.

reply »

ICT Total SMT line Provider

SMT feeders