Mycronic AB

Mycronic's High Flex division offers SMT equipment and solu­tions to high-mix electronics manufacturers with a requirement for quick changeover, high quality and high equipment utilization rate.

Manufacturer

Connected and flexible full-line solutions for PCB assembly

Mycronic is a Swedish high-tech company engaged in the development, manufacturing and marketing of production solutions to the electronics industry. Mycronic is listed on NASDAQ OMX, Stockholm, Small Cap.

Mycronic’s High Flex division offers surface mount technology (SMT) equipment and solu­tions to electronics manufacturers with a requirement for quick changeovers in produc­tion while retaining high rates of utilization. We provide systems for circuit board assem­bly, both full­-line solutions and individual systems for specific process steps, as well as advanced software for assembly process man­agement and factory connectivity.

Mycronic High Flex offering for PCB assembly, the MYPro range, include machine platforms for high-speed dispensing of solder paste and adhesives, for mounting of electronics components onto circuit boards, for inspection of solder paste and mounted circuit boards as well as board handling systems. In addition, storage solutions and process software comprise important elements in our complete solutions.

Mycronic AB Postings

13 products »

Mydata MY600 High-Speed SMT Jet Printer

MY600 - Millions of dots ahead of its time. The next-generation MY600 Jet Printer now enables SMT producers to achieve optimal solder joints on complex boards at speeds of more than one million dots per hour, a 50% increase in throughp...

Printing

 Mydata MY600 High-Speed SMT Jet Printer

Mydata PCB Workstation

Ergonomic workstation for PCB inspection and manual assembly Board stop function, board release Arm rests and earth strap connection Board thickness down to 0.4 mm Motorized wid...

Hand Assembly

Mydata PCB Workstation

Mydata PCB Turn Unit

PCB turn unit for L, T or X configuration Board routing through L-bend, T-junction or crossover Precision controlled DC motors Solid welded steel frame construction Light tower...

Board Handling - Conveyors

Mydata PCB Turn Unit

Mydata Bi-directional PCB Inverter

Bi-directional board inverter Programmable board flow sequence Pass-through function Bi-directional Light tower as status indicator The Board Inverter turns t...

Board Handling - Conveyors

Mydata Bi-directional PCB Inverter

Mydata Telescopic Gate

Telescopic gate with "handsfree" operation. Fully automated, "handsfree" 700 mm opening DC-motor controlled telescopic movement The telescopic gate conve...

Board Handling - Conveyors

Mydata Telescopic Gate

Mydata FIFO, LIFO Buffer

Buffer unit for equipment load balancing The buffer unit is designed to balance station capacity differences and offer board escape possibilities in case of failures of the connected systems. The FIFO/LIFO capability and the abilit...

Board Handling - Conveyors

Mydata FIFO, LIFO Buffer

Mydata Automatic PCB Magazine Loader

The loader separates and loads bare or pre-mounted PCBs from rasterized magazines onto a subsequent production line. The automatic loader holds up to 3 magazines simultaneously. The filling ratio, skip factor, and first and last load...

Board Handling - Conveyors

Mydata Automatic PCB Magazine Loader

Mydata Bare Board Destacker

The destacker separates single boards from the bottom of the stack and transports them one by one onto the production line. If the unit becomes empty, or the destacking switch is turned off, the conveyor starts to work as a regular transport co...

Board Handling - Conveyors

Mydata Bare Board Destacker

Mydata Board Train Conveyors

Board train conveyors for higher throughput Increases overall throughput Automatic grouping of several PCBs Improves board transfer times Reduced number of nozzle changes...

Board Handling - Conveyors

Mydata Board Train Conveyors

Mydata SMD Tower

Automated & MSD compliant storage. The MYDATA SMD Tower provides more intelligent and automatic access to component reels and trays. The MYDATA SMD Tower boosts production efficiency with:...

Board Handling - Storage

Mydata SMD Tower

See all products from Mycronic AB »

5 technical articles »

Robust Reliability Testing For Drop-on-Demand Jet Printing

Mar 19, 2020 | Gustaf Mårtensson, Patrik Mirzai

In this study, the question was how to perform statistically reliable robust- ness tests for the non-contact drop-on-demand printing of functional fluids, such as solder paste and conductive adhesives. The goal of this study was to develop a general method for hypothesis testing when robustness tests are performed. The main problem was to determine if there was a statistical difference between two means or proportions of jet printing devices. In this study, an example of jetting quality variation was used when comparing two jet printing ejector types that differ slightly in design. We wanted to understand if the difference in ejector design can impact jetting quality by performing robustness tests. and thus answer the question, "Can jetting differences be seen between ejector design 1 and design 2"?...

Jetting of Isotropic Conductive Adhesives with Silver Coated Polymer Particles

Dec 26, 2018 | Gustaf Mårtensson

The development of novel interconnection materials for production of electronics is of considerable interest to fulfill increasing demands on interconnect reliability in increasingly demanding environments with respect to temperature extremes, mechanical stresses and/or production limitations. Adhesives are playing an increasingly significant role in the continuously evolving electronics industry. (...)

Specific applications will be presented that highlight the feasibility of the technology with respect to conductivity, structural reliability and lifetime standards. The deposition of the novel ICA has been performed using a jet printing technology to ensure both precise and accurate positioning, size and volume delivery....

Jetting Strategies for mBGAs a question of give and take...

Apr 02, 2015 | Gustaf Mårtensson; BioNano Systems Laboratory, MC2, Petter Svensson, Thomas Kurian; Micronic Mydata AB

The demands on volume delivery and positioning accuracy for solder paste deposits are increasing as the size and complexity of circuits continue to develop in the electronics industry. According to the iNEMI 2013 placement accuracy for these kinds of components will reach 6 sigma placement accuracy in X and Y of 30 um by 2023.

This study attempts to understand the dependencies on piezo actuation pulse profile on jetting deposit quality, especially focused on positioning, satellites and shape. The correlation of deposit diameter and positioning deviation as a function of piezo actuation profile shows that positioning error for deposits increase almost monotonically with decreasing droplet volume irrespective of the piezo-actuation profile. The trends for shape and satellite levels are not as clear and demand further study. ...

Tackling SMT Enemy Number One - Raising The Standard of Solder Paste Application

May 14, 2009 | MYDATA automation

Is screen printing technology able to keep pace with rising quality demands and increasingly complex board layouts? Or, is new jet printing technology ready to fill the gap? A comparison study between the two methods reveals some interesting differences. Screen printers offer some possibilities for optimizing solder paste deposits, but optimization is far easier and quicker with the jet printer. At the same time, the ability to print individualized deposits on every single pcb pad may be the ultimate answer to the growing quality challenge....

Startling Results From Reliability Testing

Mar 13, 2009 | Lars Wallin, Project Manager Live Production Events at EP shows at the Stockholm Fair IPC European Representative.

Open product reliability testing in Stockholm, Sweden in January as part of a live production event generated some quite startling results. It was apparent that many components simply cannot handle the high reflow temperatures of a lead-free soldering process, and that many surface-mount machine suppliers are battling significant problems with QFN packages and other components that are mounting edgeways (bill boarding). However, some suppliers have achieved good results....

80 news releases »

Invitation to presentation of Mycronic's Q4 2023

Feb 19, 2024 | Analysts, investors and media are invited to the presentation of Mycronic's Q4 2023. The presentation will be held on February 8, 2024, at 10:00 a.m. CET. The report is published on February 8, 2024, at 8:00 a.m. CET and will, together with the presentation and webcast, be available via Mycronic's report archive.

Mycronic receives order for an SLX mask writer

Dec 04, 2023 | Mycronic AB (publ) has received an order for an SLX mask writer from an existing customer in Asia. The order value is in the range of USD 5-7 million. Delivery of the system is planned for the second quarter of 2024.

Mycronic receives order for a Prexision 8 Evo

Nov 13, 2023 | Mycronic AB (publ) has received a replacement order for a Prexision 8 Evo from an existing customer, for delivery to Asia. The order value is in the range of USD 13-15 million. Delivery of the system is planned for the first quarter of 2025.

Mycronic introduces the MYPro A40: an evolutionary high-speed, high-flexibility pick-and-place platform

Oct 23, 2023 | Mycronic is introducing its next-generation MYPro A40 pick-and-place solution, equipped with an all-new MX7 high-speed mounthead technology. The new platform, which increases top placement speeds by 48% while handling a significantly wider range of component types and sizes, will be launched at Productronica 2023 in Munich.

Mycronic to showcase more versatile, high-productivity assembly solutions at Productronica 2023

Oct 23, 2023 | Mycronic will continue to respond to growing customer demand for high-flexibility, high-productivity solutions for zero-defect PCB assembly at Productronica 2023 in Munich on November 14-17.

Mycronic receives first order for solid state laser upgrades

Oct 09, 2023 | Mycronic AB (publ) has received the first order for upgrades of already installed display mask writers from gas laser to solid state laser from SK Electronics in Japan. Delivery of the upgrades is planned during the coming two years.

Mycronic appoints Nomination Committee

Sep 25, 2023 | The Nomination Committee for Mycronic's 2024 Annual General Meeting has been appointed in accordance with the instructions for the Nomination Committee as decided by the 2023 Annual General Meeting.

Mycronic receives order for a Prexision 8 Evo

Sep 25, 2023 | Mycronic AB (publ) has received an order for a Prexision 8 Evo from an existing customer in Asia. The order value is in the range of USD 17-20 million. Delivery of the system is planned for the third quarter of 2024.

Mycronic receives order for an SLX mask writer

Jul 10, 2023 | Mycronic AB (publ) has received an order for an SLX mask writer from an existing customer in Asia. The order value is in the range of USD 7-9 million. Delivery of the system is planned for the fourth quarter of 2024.

Interim Report January–September 2022

Oct 28, 2022 | "Order intake increased during the third quarter by 30 percent compared with a relatively weak corresponding quarter in the preceding year, mainly driven by a strong performance by Pattern Generators, and supported by positive currency effects. Net sales increased 23 percent, with good growth in High Flex and High Volume, here again supported by positive currency effects. EBIT increased to SEK 203 million with an EBIT margin of 17 percent and I am pleased to note that all divisions reported double-digit EBIT margins for the second consecutive quarter," says Anders Lindqvist, President and CEO.

70 more news releases from Mycronic AB »

ICT Total SMT line Provider

SMT feeders