The use of PSLM combined with the PMP to achieve 100% high-precision solder paste 3D measurement in SMT production line. Using PSLM technology, changed the traditional way of generating 3D Struct Light, the traditional glass grating moire required mechanically, driven by a piezoelectric motor (PZT)....
|
Test Equipment |
S-350/S-600 series offline SPI were designed to make in-house offline SPI , This series SPI apply to small and normal size PCB , and satisfy customers with small investment to inspect printing quality, moving convenience, simple operation and high accuracy, the highest cost performance options...
|
Test Equipment |
● Arch bridge type suspending direct-connected scraper, programmable printing head.
● Double sliders ensures the printing head moving accuracy and stability when scraper is running back and forth.
● Programmable motor controls conveying speed and conveys PCB in the precise positio...
|
Printing |
● Arch bridge type suspending direct-connected scraper, programmable printing head.
● Double sliders ensures the printing head moving accuracy and stability when scraper is running back and forth.
● Programmable motor controls conveying speed and conveys PCB in the prec...
|
Printing |
By manual lifting the conveyor section, access is gained to the rear of the line....
|
Board Handling - Conveyors |
This unit is used as a visual inspection station for operators controlling the boards right after a conformal coating line....
|
Board Handling - Conveyors |
The unit provides a 'normal open' passage in a PCB assembly line. An integrated conveyor segment slides across the opening to deliver PCB to downstream machine....
|
Board Handling - Conveyors |
This unit is used when a passage way is required in a production line....
|
Board Handling - Conveyors |
The unit installed after AOI for separated NG board for visual inspect and good board will pass through without stopping....
|
Board Handling - Conveyors |
The unit installed after AOI for separated NG board for visual inspect and good board will pass through without stopping....
|
Board Handling - Conveyors |
This unit is used to link between production machines or board handling units....
|
Board Handling - Conveyors |
The inspection conveyor is used when frequent visual inspection of PCB’s is required in the PCB assembly line....
|
Board Handling - Conveyors |
This unit is used to link between production machines or board handling units....
|
Board Handling - Conveyors |
Fast heating precise temperature control precise soldering...
|
Soldering Robots |
L332 is a 6 axis soldering robot with X,Y1,Y2,Z,R,and solering wire feeding motion system. it is equipped with 150W heating system with rapid heat recovery ,soldering tip is easy to be exchanged with low cost .Automatic solder wire feeder . Self-developed software easy to operate....
|
Soldering Robots |
L331 is a 5 axis soldering robot with X,Y,Z,R,and solering wire feeding motion system. it is equipped with 150W heating system with rapid heat recovery ,soldering tip is easy to be exchanged with low cost .Automatic solder wire feeder . Self-developed software easy to operate....
|
Soldering Robots |
The equipment is mainly composed of microfocus X-ray source, large area imaging unit, mechanical motion mechanism, electrical control system, image processing system, security protection system; Integrating modern nondestructive testing, computer software technology, image acquisition and process...
|
Test Equipment |
The system mainly consits of micro focal X-ray source, image imaging unit,computer image processing system, mechanical system, electrical control system, safety protection system, warning system , including modern non-destructive tessolderg, computer software technology, image acquisition and pro...
|
Test Equipment |
H351 is a 5 axis soldering robot with X,Y,Z,R,and solering wire feeding motion system.It is equipped with 400W high frequency heating systerm with rapid heat recovery,soldering tip is easy to be exchange with low cost.Break-tin automatic solder wire feeder can reduce burst tin  ...
|
Soldering Robots |
CM-S4 Adopt step-servo motor and 4 mounting spindle ,with stage vision system which is capable to mount 0201 chips to the largest 30mm IC .it is very suitable for Small batch production; University teaching use; R&D customization; Personal entrepreneurship; processing on giving mater...
|
Pick & Place |
X/Y axis controlled by Panasonic servo motor & ballscrew, max speed 1500mm/s.
Max W400*D430mm PCB capable
Repeatable accuracy: +/-0.025mm
Nozzle temperature control system
Nozzle vacuum cleaning/paper cleaning system.
Liquid level in tube detecting syst...
|
Dispensing |
SIEMENS PLC+PID closed loop control to achieve high precise temperature control and repeatable profiles....
|
Reflow |
Conveyor system adopts the stepless electronic speed governing and closed loop control system which allows a stable and accurate performance....
|
Wave Soldering |
The main model of the CIF by Exmore range is the vapor phase VS-500.IV.
The concept of the machine allows to solder even the most complex cards of a format of 500 x 500 x 60 mm while
ensuring optimal quality thanks to,
• The inert atmosphere resultin...
|
Reflow |
Infrared ic heater T962C works automatically by micro-computer control. Can satisfy a dissimilarity SMD、BAG Soldering a request. Whole soldering process to complete automatically, easy to use, Adoption fast infrared radiation and circulation the wind for heat, so the temperature is very Accurate and...
|
Reflow |
E4/E6 is a capable lead free CE certificated reflow oven with 4/6 upper & 4/6 bottom individual hot air convection zones, pin chain&mesh belt inline conveyor. It's the best choice to go with small volume pick&place machine like Autotronik, TWS, DIMA, ESSEMTEC etc....
|
Reflow |
Lead Free Reflow Oven NSF Series Includes:
● Lead Free Reflow Oven
● Industrial PC control system
● Automatic lubricating design by pressure pump
● Flux Recovery system
● Cooling system
● 1 year warranty...
|
Reflow |
Industrial PC control System Long lifetime and Good heat uniformity of solder pot Special design to implement less solder residue generated Patented design of impeller & channel for improving soldering wave stability Spraying evenly and minimized the overlapping Convenience for maintenance....
|
Wave Soldering |
M400 is a CE certificated compact Lead Free Wave Solder Machine with inline finger conveyor, stepper driven spraying fluxer, hot air preheat zone & Ti dua wave solder pot....
|
Wave Soldering |
Lead free wave solder machine
Spraying system driven by step motor and PLC controller
1 individual bottom preheating zones
Titanium alloy dual wave solder pot
Titanium alloy finger conveying system.
Colored touch screen panel
Machi...
|
Wave Soldering |
CX-3500 is use to examine internal solder joints, BGA, IC and other complex components.It adopts the structure of high resolution enhanced screen and sealed microcoking X ray tube combination, through X-ray non-destructive fluoroscopy, real-time observation of clear pictures. In addition, the powerf...
|
Inspection |
CX-3000A is use to examine internal solder joints, BGA, IC and other complex components.It adopts the structure of high resolution enhanced screen and sealed microcoking X ray tube combination, through X-ray non-destructive fluoroscopy, real-time observation of clear pictures.In addition, the powerf...
|
Inspection |
Inline SPI Machine S-250I/S500I were designed to make in-house Inline SPI, This series SPI apply to small and normal size PCB, and satisfy customers with small investment to inspect printing quality, moving convenience, simple operation and high accuracy, the highest cost performance options for cus...
|
Inspection |
S-350/S-600 series offline SPI were designed to make in-house offline SPI, This series SPI apply to small and normal size PCB , and satisfy customers with small investment to inspect printing quality, moving convenience, simple operation and high accuracy, the highest cost performance options ...
|
Inspection |
Solder paste thickness inspection BT-460 is mainly used to measure the thickness of solder layer on PCB. Its principle is that a very thin laser beam is emitted by the laser to illuminate the PCB at a certain Angle, and then the camera is used to observe the laser beam forming a thin line on PCB.Sol...
|
Inspection |
1. America closed type X-ray tube, long lifetime, maintenance-free.
2. 17” super definition digital flat panel detector (FPD), eliminate the scanning detector.
3. Ultrafast counting, one 7” (180mm) reel needs about 9s, four 7” reels or one 15&rdq...
|
Inspection |
1. Japan Hamamatsu X-ray tube, the best closed type X-ray tube in the world, with more than 10000 hours lifetime, maintenance-free.
2 New generation IRay 5” HD digital flat panel detector (FPD).
3. FPD instead of the table can tilt 60°, won’t sacrifice ...
|
Inspection |
This conveyor is used to feed PCB’s or pallets into wave soldering machine....
|
Wave Soldering |
This conveyor is used to unload PCB’s or pallets from a wave soldering machine with adjustable angle. Decline section presents PCB/pallet at standard height to downstream machine....
|
Wave Soldering |
This conveyor is used to unload PCB’s or pallets from a wave soldering machine with adjustable angle. Decline section presents PCB/pallet at standard height to downstream machine....
|
Wave Soldering |
This conveyor is used to unload PCB’s or pallets from a wave soldering machine at 6-7° angle. Decline section presents PCB/pallet at standard height to downstream machine....
|
Wave Soldering |
Lead free wave solder machine
Spraying system driven by step motor and PLC controller
1 individual bottom preheating zones
Titanium alloy dual wave solder pot
Titanium alloy finger conveying system.
Colored touch screen panel
Machi...
|
Wave Soldering |
AI-550 Standard Insertion platform with various component feeder which can easily help you realize insertion automation especially for combined standard and odd shape components. ...
|
Other |
AI-400 Standard Insertion platform with various component feeder which can easily help you realize insertion automation especially for combined standard and odd shape components....
|
Other |
CM-S82 Adopt linear motor and 8 mounting spindle ,with flying vision the efficiency of mounting and accuracy is greatly improved, it is applicable to 0402 chips to the largest 30mm IC....
|
Pick & Place |
Simultaneous realization of high area productivity and high-accuracy placement.
◆ High production mode(High production mode: ON) Max. speed: 77 000 cph(IPC9850(1608):59 200cph )/Placement accuracy: ±40μm
◆High accuracy mode (High production mode: OFF) Max. speed: 7...
|
Pick & Place |
The introduction of light-weight 16NH V3 further advances. the performance of the machine.
◆High production mode(High production mode: ON) Max.speed:92000cph (IPC9850 (1608):66 200 cph)/Placement accuracy:±37μm
◆High accuracy mode(High production mode: OFF) Max.speed...
|
Pick & Place |
CM-V8 Equipped with 8 spindles * 1 gantry and X/Y linear motor which makes machine running fast and stably, max LED mounting speed can readh 40,000 pcs/Hour, Lens mounting speed can reach 18, 000 pcs /hour....
|
Pick & Place |
TI-750 can automatically feed and cut reel pins and insert the pin into the hole of PCB precisely and efficiently. advanced software based on Window OS make programming very easy....
|
Industrial Automation |
Lead Free Reflow Oven NSF Series Includes:
● Lead Free Reflow Oven
● Industrial PC control system
● Automatic lubricating design by pressure pump
● Flux Re...
|
Reflow |