cixi tianhao dispensing equipment co.,ltd Products

SMT Products and Services offered by cixi tianhao dispensing equipment co.,ltd


cixi tianhao dispensing equipment co.,ltd

dispensing equipment,dispensing machine,dispensing systems,dispensing robot,industrial robot liquid dispenser,glue dispenser,adhesive dispenser,barrel,syringe,dispensing tip,needle »»

cixi tianhao dispensing equipment co.,ltd website
  • Browse:

18 listed by cixi tianhao dispensing equipment co.,ltd

Product

Category

Screw filling glue machine(cyanoacrylate dispensing)

Specifications Using for the various screws adhesive with Anaerobic Adhesive 1)locks bolts ,prevents tampering stops corrosion 2)seals welds ,seals threaded pipe ,seals nicked threads • Glue will evenly dispensing inside the screw • Position place adjustment convenience • Dispensing end can ...

Screw filling glue machine(cyanoacrylate dispensing)

TH-200S T&H Two liquid Admixture dispenser

Appling Scope The dispenser is suitable to dispense 1:1 A, B liquid adhesive Key Features 1.Have a big capacity cartridge, make the time of importing materials minimum, reduce waste. 2.Adopted with the TH-900J two components manual valve, can control the flow conveniently. ...

TH-200S  T&H Two liquid Admixture dispenser

TH-100S Manual dispenser

Appling Scope The machine is suitable for the adhesive which the dispensing volume is big .Also suitable for the products which are required high precision Key Features 1. Have a big capacity cartridge, make the time of importing materials minimum, reduce waste. 2. Adopted with ...

TH-100S Manual dispenser

TH-206B Automatic compensation time dispenser

Appling Scope: Apply for very high volume products. Precision Tolerance: 0.00005S Key Features: 1 Automatic compensation function for elimination volume tolerance with liquid Level gap. 2. Microcomputer time control technology, four LED digital display 3.Fast teach function ca...

TH-206B Automatic compensation time dispenser

TH-206H T&H Multi-spot hypothesis dispenser

Appling Scope: For needs to select the more different quantity deposit on the sole work piece the product to suppose. Precision Tolerance:0.001S Key Features 1.The digital dispenser has three modes of operation (manual, timed and cycling), the dosing time and cycle time and a...

TH-206H T&H Multi-spot hypothesis dispenser

TH-2004KB T&H Digital display cycles dispenser

The TH-2004kB has a bright four-digit LEDscreen and automatically cycle, "teach & learn" function suitable to dispense for mass production or for the products which are required high precision. Precision Tolerance:0.001S Features: 1.Manual, Timer, or Cycle Operation Modes ...

TH-2004KB T&H  Digital display cycles dispenser

TH-2004KT Digital display dispenser

The TH-2004kT has a bright LCD screen and "teach & learn" function,Suitting high precision dispense product. Repeatability is 0.001S Features: 1. has a bright four-digit LED screen. 2."have tech&learn" function, operator can learn the setting knowledge is easily. 3...

TH-2004KT Digital display dispenser

TH-2004K T&H Dosing Dispenser

This dispenser Designed for wide range of applications, and provides a simple and economic solution to fluid dispensing. The unit can either be controlled with a foot pedal or a finger switch for hand-held dispensing applications. . Min deposit is 0.005ml Features: 1. Has an analog time...

TH-2004K  T&H Dosing Dispenser

T&H Two component glue dispensing robots

1. May realize the two component liquid Automatic ratio, automatic mixing and automatic dispensing according to the procedure in advance 2. The feeding system quote large-capacity storage system can continuous feed material, the mixing end cleaning is easy. 3. have TH-700J valve, rock ...

T&H Two component glue dispensing robots

Transformer sealing glue robots

1. Ten dispensing end can Synchronous work. 2. Trimming Fixture with precision to change the pitch with dispensing end . 3. It independent control each dispensing end to close and open, dispensing volume. 4. The computer integration control, the operation is simple, easy to study to...

Transformer sealing glue robots

IC Sealing robots

1. The machine Special design for the IC sealing technical. 2. Heating temperature control device with Japan. Keep the temperature between dispensing end and basic board. Tolerance +/-1�� 3. Directly take the COB black glue into the tank, pick-and-place easy. without cleaning 4. Clos...

IC Sealing robots

T&H LED light high speed dispensing robots

1. High precision quantification supplier liquid system.. Dispensing tolerance accuracy is 0.0001ml 2. CCD image magnification listing, "+"target precision piston programming can ensure that Dispensing positional accuracy. 3. Japan imports servo system, good stability, high repetition ...

T&H LED light high speed dispensing robots

T&H Electric iron sealing glue robots

1. Using two large-capacity feeding system, double heads and synchronous operations increase productivity 2.CCD assisted with the programming function, According to oneself products can be pre-set number of enforcement procedures at any time convenient call ...

T&H   Electric iron sealing glue robots

T&H 3 axis high precision dispensing(coating) robots

1. The machine is designed for fast dispensing placement accuracy and repeatability without the expense for fast dispensing placement accuracy and repeatability ,even without the expense of coordinated X.Y moving ,it seamlessly integrates windows based, same quote the advanced CCD (camera) techn...

T&H 3 axis high precision dispensing(coating) robots

TH-2004KE T&H Digital cyclic dispenser

Appling Scope The machine is used for precise dispensing or mass production. Key Features 1. The auto-cycling function can reduce labor intensity and increase the production. 2. The digital dispenser has three operating modes (manual, timing and cycling) 3. The vacuum suck-back...

TH-2004KE T&H Digital cyclic dispenser

TH-400J Syringe valve

1.For controlling of small flow and low-middle viscosity materials 2.Syringes storing material, it can be used for precise dispensing 3.The question of fluid level affecting the dispensing volume has been solved fully. 4.The material of the parts touched fluid is corrosion-resistant and f...

TH-400J Syringe valve

TH-500J T&H Diaphragm valve

1.Suitable for low and middle viscosity materials 2.The material of valve's body has been hardened. 3.The latest technology of diaphragm has been applied. 4.The material of the parts touched fluid is corrosion-resistant and flexible. 5.The liquid can't flow backward 6.Can interrupt t...

TH-500J T&H Diaphragm valve

dongguan tianhao automatic equipment co.,ltd

Dongguan TianHao Automatic Equipment CO., LTD is the first manufacturer of fluid controlling system in China. The precise dispensing systems are applied in dispensing all kinds of adhesives, sealants, lubricants and other assembly fluids accurately and consistently. Virtually they are used in every ...

dongguan tianhao automatic equipment co.,ltd

High Precision SMT Fluid Dispensers

Fluid Dispensers