Laser cut stainless steel stencil with etched areas.
When huge open spaces have to be produced on the bottom side of a stencil, the etching technology is one opportunity to realize it. The apertures for the solder paste print process are still manufactured in laser cut technology. The...
|
Solder Paste Stencils |
Repair stencils and Reballing stencils in a lasercuting and laserwelding production process
Since more than 10 years LaserJob is manufacturing repair stencils in a lasercut and laserwelding process. With the introduction of the SMD – Technology the constantly va...
|
Solder Paste Stencils |
Laser cut stainless steel Adhesive Stencil for adhesive printing.
Adhesive stencils are used to solder SMD components with a solder wave, whereas the components are fixed with an adhesive. The adhesive spots are print in one printing process by using a lasercut stainless steel SMD - s...
|
Solder Paste Stencils |
Lasercut LTCC-stencil (Low Temperature Cofired Ceramic)
The LTCC-technology (low temperature co-fired ceramic) is used in the hybrid-technique when several interconnection levels are realized. The connections between the layers are manufactured with ver...
|
Solder Paste Stencils |
Laser cut stainless steel stencil for solder paste printing on wafer.
Wafer bumping stencils are characterized by a high number of apertures which lie close together in the size of 90µm x 110µm. A package density of up to 250000 openings is not unusual. Th...
|
Solder Paste Stencils |
With the 3D-PatchWork® - stencil from LaserJob it is possible to print simultaneous on several levels of the PCB. Height differences from 10µm up to 2mm are realized with the PatchWork - Technology. At a height difference of >100µm we recommend...
|
Solder Paste Stencils |
Step-up / Step-down Stencil.
The patented step stencil from LaserJob, called PatchWork® - stencil, was developed to print in one printing step different paste deposit heights. Due to the multiplicity of different component leads on one printed cir...
|
Solder Paste Stencils |
Laser cut stainless steel stencil with nano coating from LaserJob.
The patented NanoWork - stencil from LaserJob is based on a laser cut SMD stencil. Since 2007 LaserJob coates SMD - stencils and step stencils in an in-house process. The NanoW...
|
Solder Paste Stencils |
LaserJob has been manufacturing laser cut SMD stencils for last 20 years. In strained condition with a cutting opening of 20µm an aperture size accuracy of ±3µm and an aperture positioning accuracy of ±10µm is guaranteed for SMD - ...
|
Solder Paste Stencils |