FKN Systek K3000 - Manual Circular-Linear Blade PCB Depanelizer

FKN Systek K3000 - Manual Circular-Linear Blade PCB Depanelizer Description:

FKN Systek K3000 - Singulate scored and skip scored panels up to 24" long

• ESD protective mat on back table
• Adjustable front and back support table
• Singulate panels with components up to 2.5" high
• Available in 18" blade (standard) or 24" blade (long)
• Optional tool bar for accurate placement of PCB panel.
• Adjustable right and left blade guards for operator safety.

The K3000 manual linear blade depanelizer is designed for singulating longer boards and scored PCBs with skip routed sections. Simply place the scored section on the linear blade and pull the circular blade carriage across the top of the scoreline to split the panels. The top circular blade can be adjusted up and down to provide a cutting gap most suitable for the panel being singulated. Standard setting is to close the gap to the point where a piece of paper placed on the linear blade will cause the circular blade to rotate when traveling across the linear blade.

The K3000 is available in a standard 18" linear blade version and in a long 24" linear blade version for extra long PCB panels. Blades are flat on one side with a tapered profile on the other, as illustrated below. For panels with high components close to the edge of the board, (ie. wire wrap or connector pins), the blades are available in a thin edge version.

Specifications:

• Cut panels to 18" or 24" long
• Weight: 45 lbs 20Kg

K Series PCB Depanelizers

All of the K series depanelizers use the same principle of circular blade on circular blade or circular blade on linear blade operation to separate the panels by applying pressure along the remaining material of a scoreline. The blades for the K1000 to the K6000 are flat on one side, so boards with components up to the edge of the scoreline can be separated. The K7000  has extra thin blades for boards with very tight component spacing.