SMT Equipment

Precision Lead Former for Taped RADIAL Components (CF-9)

Company Information:

A Manufacturer of High Quality, Precision, Automated Fluid Dispensing and Conformal Coating Systems, SMT Cover Tape Peel Tester and Lead Forming machines for through-hole component preparation.

Grand Junction, Colorado, USA

Manufacturer

  • Phone (970) 245-0408
  • Fax (970) 245-9674

See GPD Website »

Company Postings:

(16) products in the catalog

(10) technical library articles

(57) news releases

Precision Lead Former for Taped RADIAL Components (CF-9)

Precision Lead Former for Taped RADIAL Components (CF-9)

Name:

Precision Lead Former for Taped RADIAL Components (CF-9)

Category:

Lead Forming

Offered by:

GPD Global

View Precision Lead Former for Taped RADIAL Components (CF-9)

   

Precision Lead Former for Taped RADIAL Components (CF-9) Description:

Precision Lead Former for Raidal Components (CF9)

The CF-9 Radial Lead Former forms and cuts 2- and 3-leaded taped radial components such as TO-92s, capacitors, transistors, LEDs, etc. - precisely and repeatedly, in standard and special forms.

This machine is capable of forming and cutting up to 25,000 parts per hour with its variable speed motor. Its two die stations are independently adjustable and feature micrometer scales with display increments to 0.001” (0,025 mm).

Dies are easily replaced in minutes, minimizing the change-over time from one set up to another.

The CF-9 is built to be rugged with sealed ball bearing shaft assemblies for low maintenance. 

Micrometer Adjustment Included with Every CF-9

Display increments to 0.001” (0,025 mm) ± 0.002” (0,05 mm) repeatability. This adjustment allows the operator to quickly set up the CF-9 to the correct setting for forming and/or cutting radial component leads.

Component Forming Dies

  • CF-9 component forming dies are precisely manufactured and are available to form two-leaded components with center-tocenter dimensions up to 0.400” (10,16 mm) as well as 3-leaded TO-92 transistors.
  • CF-9 component forming dies can be ordered to form a wide variety of component shapes. Both common and special configurations can be produced by using CF-9 component forming dies.
  • All CF-9 dies will also work on the GPD CF-10 Loose Radial component Lead Former.

GPD Global's Precision Lead Formers

GPD Global Axial and Radial precision lead formers have been industry standards since the 1980s, consistently outperforming and outliving the competition.

The CF-8 for Axial components and the CF-9 for taped Radial components are capable of forming a variety of forms including flushmount, standoff, and lock-in (dependent on inserted dies). The CF-10 handles 2- to 7-leaded Radial components in bulk or loose form and is capable of a variety of forms including flushmount, standoff, lock-in, and spread forms.

View Precision Lead Former for Taped RADIAL Components (CF-9)

Precision Lead Former for Taped RADIAL Components (CF-9) was added in Apr 2015

Precision Lead Former for Taped RADIAL Components (CF-9) has been viewed 1621 times

15 More Products from GPD Global :

Cost-effective Conformal Coating Machine

ICT Total SMT line Provider