AUTO WAVE LOADER from PROMATION

AUTO WAVE LOADER from PROMATION Description:

PROMATION offers two different solutions for loading a wave solder machine.

The EIC-710 is a basic angled transfer conveyor that generally has the line operator hand place the PCB or pallet onto the edge rails for transfer into the wave.

The ETF-700 is a tilt and feed conveyor system. This station can accept a PCB or pallet from the line (zero degrees) then lower down and tilt before transferring the product into the wave. This station is great when transferring product directly from a hand assembly line or other type process that requires a differential change in a small foot print area.

• Programmable logic controller
• AC drive motor(s) with fixed belt speed
• Green ESD edge belt
• Retractable hand crank for width adjusting
• ESD grounding plug in port
• Audible alarm
• Pneumatic lift (ETF-700 only)
• Easy Roll wheels w/leveling feet +/- 30 mm
• SMEMA 1.2 compliant with jumper for wave

Technical Specifications:

• 3 mm edge contact
• 4 PCB handling sizes available
• Minimum PCB thickness 1 mm (0.045”)
• Maximum PCB weight 1.8kg (5 lbs)
• Voltage (USA = 110v) or (220 v optional)
• Power consumption: 28 watts (EIC) 61 watts (ETF) 1A
• Top side clearance 30 mm (1.1”)
• Bottom side clearance 30 mm (1.1”)
• Look up product sensing (adjustable focal detection)
• Rail to floor height (950 mm) 37.4” or (900 mm) 35.4”
• 71 PSI filtered air (5 bars) (6 mm coupling) (ETF only)

Available Options:                                       

• Variable speed
• Automatic width adjustment