SMT Equipment

PEM R'ANGLE Fasteners

PEM R'ANGLE Fasteners

PEM R'ANGLE Fasteners


PEM R'ANGLE Fasteners



Offered by:



PEM R'ANGLE Fasteners Description:

Patented PEM® R’ANGLE® fasteners for thin metal assemblies and printed circuit boards create strong right-angle attachment points to enable tighter design control, reduced hardware counts, and associated production economies.  This family of fasteners consists of self-clinching types for permanent installation into metal sheets and ReelFast® SMT surface mount versions for permanent installation onto printed circuit boards.

R’ANGLE clinch fasteners for metal can serve as ideal replacements for conventional bent edge tabs, bent center tabs, bent flanges, angle brackets, or tack welds.  R’ANGLE surface mount fasteners for printed circuit boards eliminate the usual requirements for angle brackets or threaded right-angle blocks.

For metal assemblies Type RAA™ aluminum clinch fasteners install in aluminum sheets as thin as .040” / 1mm and accept thread-forming screws in sizes #4-40, #6-32, #8-32, and M3 and M4.  Type RAS™ steel threaded fasteners install in aluminum or steel sheets as thin as .040” / 1mm and are available in thread sizes #4-40, #6-32, #8-32, and M3 and M4.  A single mating screw completes the component attachment process.  Holding power of the fastener will be unaffected by any tightening or loosening of the screw.

ReelFast SMT fasteners are designed to mount board to chassis, chassis to board, or component to board.  They install at the edge or interior of boards (as thin as .040” / 1mm) in the same manner and at the same time as other surface mount components prior to the automated reflow solder process.  Thread sizes for mating screws range from #2-56 through #8-32 and M2 through M4.

Detailed specifications, CAD models, installation animations, and performance data (Bulletin RA) for these RoHS-compliant fasteners can be accessed at

Contact Michael J. Rossi, PennEngineering®, 5190 Old Easton Road, Danboro, PA 18916-1000 USA.  Phones: 800-237-4736 (toll-free in the U.S.) and 215-766-8853; Fax: 215-766-0143. Web site:

PEM R'ANGLE Fasteners was added in Jun 2015

PEM R'ANGLE Fasteners has been viewed 746 times

2 More Products from PennEngineering :

Solder Paste Dispensing

Conformal Coating with Tilt and Rotate