6-Zone SMT Reflow Oven
6-Zone SMT Reflow Oven Description:
6-Zone SMT Reflow OvenTN360C
Protection system TN360C uses SSR solid relay (450V) that has large power and pressure prevention to non-contact output, safe and reliable. It can monitor the change of temperature and heat number in furnace chamber with the functions fuzzy control and data collection. Then control the heating component with the least pulse and response quickly. TO keeps the Temperature control accuracy, but the equipment can not be damage for the high current and high voltage. And each room fits a safety pipe which is high temperature and high pressure resistant function so that the whole system can run safely and calmly.
Main features for TN360C
1> Intuitional welding control, TN360C adopts advanced furnace temperature collection system. It can test temperature curve and temperature in furnace hearth. The temperature curve can be recorded or printed at the same time.
2> Smooth and safe transmission system, Drive system adopts a high quality conversion motor and conversion system .It also has a closed-loop governor and Turbine speed reducing box of 1,100 to keep running smoothly .Speed,01600mm/min.
3> Stable and safe electric control system, Delay switch protection. After power off, temperature drops evenly so that can prevent damage to transmission component and heater.
4> Upper and lower heating zones are separately controlled. The circulation speed can also adjust separately. It is suitable for welding different PCB plates and components.
Heating part parameter
6 heating zones(6 upper,6 cover)+1 cooling zone
Full forced Hot air heating
Heating area length
1 zone, (1up/1 below)
transverse flow vortex centrifuge blower
Built-in automatic relay heating system
To prevent over-pressure damage controller or motor when start up and to prevent component damage when welding.
PCB Board width:≤ 300mm
PCB conveyor Height：900±20mm
Conveyor Material：Stainless steel
Chain-driven Mesh belt conveyor：Net belt and chain-driven transmission
Mesh belt width：300mm
Conveyor speed：0-1600mm/min adjustable
Control part parameter
Power supply：380V (3 ph, 4 wires) 50/60Hz
Normal working power：19KW
Warm-up time：≤ 30min
Control system：PLC+ Torch module temp control system+ IPC
Range of temperature control：Room Temperature-360 °C
Temperature control：Advanced Intelligent micro computer PID temperature control automatically in each zone + SSR non-contact output
Precision of temperature control：± 2°C
Temperature distributing error：± 2°C
Machine Body Parameter
Net Weight：680 kg
Dimension( L×W×H )(mm)：(2900×900×1300mm)
Beijing Torch Co.,Ltd.
6-Zone SMT Reflow Oven was added in Mar 2016
6-Zone SMT Reflow Oven has been viewed 207 times