Jilin University

Founded in 1946, Jilin University It is a key comprehensive university under the direct jurisdiction of the Ministry of Education, and strongly supported by China’s "Project 211" and "Project 985".

School

Jilin University Postings

2 technical articles »

Design and Experiment of a Solder Paste Jetting System Driven by a Piezoelectric Stack

Jun 15, 2021 | Shoudong Gu, Xiaoyang Jiao, Jianfang Liu, Zhigang Yang, Hai Jiang and Qingqing Lv

To compensate for the insufficiency and instability of solder paste dispensing and printing that are used in the SMT (Surface Mount Technology) production process, a noncontact solder paste jetting system driven by a piezoelectric stack based on the principle of the nozzle-needle-system is introduced in this paper, in which a miniscule gap exists between the nozzle and needle during the jetting process. Here, the critical jet ejection velocity is discussed through theoretical analysis. The relations between ejection velocity and needle structure, needle velocity, and nozzle diameter were obtained by FLUENT software. Then, the prototype of the solder paste jetting system was fabricated, and the performance was verified by experiments. The effects of the gap between nozzle and needle, the driving voltage, and the nozzle diameter on the jetting performance and droplet diameter were obtained. Solder paste droplets 0.85 mm in diameter were produced when the gap between the nozzle and needle was adjusted to 10 _m, the driving voltage to 80 V, the nozzle diameter to 0.1 mm, and the variation of the droplet diameter was within _3%....

Article Design and Experiment of a Solder Paste Jetting System Driven by a Piezoelectric Stack

Dec 27, 2017 | Shoudong Gu, Xiaoyang Jiao, Jianfang Liu *, Zhigang Yang, Hai Jiang and Qingqing Lv

To compensate for the insufficiency and instability of solder paste dispensing and printing that are used in the SMT production process, a noncontact solder paste jetting system driven by a piezoelectric stack based on the principle of the nozzle-needle-system is introduced in this paper, in which a miniscule gap exists between the nozzle and needle during the jetting process....

SMT spare parts - Qinyi Electronics

Sell Your Used SMT & Test Equipment