Thermaltronics USA, Inc.

Manufacturer of a wide range of Soldering Products & Accessories used in the electronics manufacturing industry.

Repair/Rework, Soldering

Thermaltronics hand soldering products, which incorporate the unique Curie Heat Technology, for precise temperature control, include both 13.56 MHz and 470 KHz power supplies and are fully compatible with competitive product offerings.

Product design and development is undertaken in the USA and Australia, with final production taking place in a customised manufacturing facility, incorporating specialised equipment and in accordance with recognised international standards of quality and compliance.

In addition to the hand soldering product line, Thermaltronics also provides an extended range of accessories to support both production and rework applications. These products include, convection rework systems, IR underboard heaters, fume extraction, test equipment, solder wire feeders and tip cleaning systems.

Thermaltronics embraces both strict quality control and conformance with International Manufacturing Standards, is in compliance with ISO 9000 & ISO 14000 and holds certification in TuV, GS, NRTL & CE.

Product warranties are among the best in the industry and distribution of the company’s products is available worldwide.

Thermaltronics USA, Inc. Postings

17 products »

TMT-2000S Curie Heat Technology Soldering and Rework Station

The TMT-2000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material. ...

Rework & Repair Equipment

TMT-2000S Curie Heat Technology Soldering and Rework Station

TMT-5000S Curie Heat Technology Soldering and Rework Station

The TMT-5000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material. ...

Rework & Repair Equipment

TMT-5000S Curie Heat Technology Soldering and Rework Station

TMT-9000S Curie Heat Technology Soldering and Rework Station

The TMT-9000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material. ...

Rework & Repair Equipment

TMT-9000S Curie Heat Technology Soldering and Rework Station

TMT-R9800S Soldering Robot

The Thermaltronics Robotic System incorporates innovative design concepts and precision components to ensure accuracy. The combination of high precision hardware and intelligent software ensures precision soldering and low operator training costs....

Soldering Robots

TMT-R9800S Soldering Robot

AF-KIT Auto Solder Feeder Kit

Thermaltronics AF-KIT auto solder feeder kit provides for single handed operation during soldering applications. The kit is provided as an accessory to existing Thermaltronics hand soldering tools. Adjustable speed, feed length

Rework & Repair Equipment

AF-KIT Auto Solder Feeder Kit

TMT-HA050 Hot Air Rework Tool

The TMT-HA050 hot air tool can be used for the removal of surface mount components such as SOIC, QFP, PLCC and other similar devices. The Thermaltronics TMT-HA050  hot air tool is a portable and flexible hot air rework s...

Rework & Repair Equipment

TMT-HA050 Hot Air Rework Tool

TMT-HA100 Hot Air Pencil

The TMT-HA100 hot air pencil is designed to remove and reflow small precision components, integrated circuits and other smaller devices. The Thermaltronics TMT-HA100 hot air pencil is a portable and flexible hot air rewo...

Rework & Repair Equipment

TMT-HA100 Hot Air Pencil

TMT-HA200 Hot Air Rework Tool

The TMT-HA200 hot air tool can be used for surface mount component removal and reflow on components such as SOIC, CHIP, QFP, PLCC and others. The Thermaltronics TMT-HA200 Hot Air Tool is a portable and flexible hot air rework syst...

Rework & Repair Equipment

TMT-HA200 Hot Air Rework Tool

TMT-HA300 Hot Air Rework Tool

The TMT-HA300 hot air tool uses a large diaphragm pump and can be used for surface mount component removal and reflow on components such as SOIC, CHIP, QFP, PLCC and others. The Thermaltronics TMT-HA300 Hot Air Tool is a portable ...

Rework & Repair Equipment

TMT-HA300 Hot Air Rework Tool

TMT-HA600 Hot Air Rework Tool

The TMT-HA600 is suitable for the more difficult applications in the removal and reflow of surface mount components. The TMT-HA600 hot air tool uses a large diaphragm pump and a high power 1300W heater, designed to work on more difficu...

Rework & Repair Equipment

TMT-HA600 Hot Air Rework Tool

See all products from Thermaltronics USA, Inc. »

24 news releases »

Thermaltronics Soldering Robots in Booth #437 at APEX

Jan 06, 2020 | Thermaltronics USA, Inc. announces that it will exhibit at the 2020 IPC APEX EXPO, scheduled to take place Feb. 4-6, 2020 at the San Diego Convention Center in California. The company will demonstrate the TMT-R9900S Inline Robot Soldering System and TMT-2200S – “simultaneous” dual port operating solder station in Booth #437.

Thermaltronics Awarded for Full Vision Soldering Robot at productronica

Nov 13, 2019 | Thermaltronics USA, Inc. announces that it was awarded a 2019 Global Technology Award in the category of Soldering Robots for its TMT-R9900S Inline Robot Soldering System. The award was presented to the company during a Tuesday, Nov. 12, 2019 ceremony that took place during productronica in Munich, Germany.

Thermaltronics to Launch Two New Solder Robots at productronica 2019

Oct 29, 2019 | Thermaltronics USA, Inc. today announced plans to exhibit in Hall 4, Stand A305 at productronica, scheduled to take place Nov. 12-15, 2019 at the Neue Messe München in Munich, Germany. In addition to the award-winning TMT-R9800S Advanced Solder Robot System, Thermaltronics will launch two new additions to its product range.

Thermaltronics Introduces New Line of Soldering Tips

Jun 09, 2019 | Thermaltronics USA including the award-winning TMT-9800S soldering robot, announces the development and introduction of a new range of new soldering tips designed specifically for difficult soldering applications.

Thermaltronics Offers Free Review and Trials of Soldering Robot

May 20, 2019 | Thermaltronics USA including the award winning TMT-9800S soldering robot, have announced a free “check and review” program in response to the significant increase in robotic soldering applications. The check and review process is designed to help customers determine if robotic soldering is a viable option, compared to current manufacturing methods.

Thermaltronics Receives 4th Award for Its TMT-9800S Soldering Robot

Apr 25, 2019 | Thermaltronics USA, Inc. announced that it was awarded a 2019 EM Asia Innovation Award in the category of Soldering Systems – Soldering Robot for its TMT-R9800S Solder Robot. The award was presented to the company during an April 25, 2019 ceremony at the Shanghai World Expo Exhibition & Convention Center during NEPCON China. The company also has been recognized by the 2018 Global Technology Awards, 2019 NPI Awards, and 2019 SMT China Vision Awards for its TMT-RS9800S Solder Robot.

Thermaltronics Awarded for Full Vision Soldering Robot at NEPCON China

Apr 24, 2019 | Thermaltronics USA, Inc. announced that it was awarded a 2019 SMT China Vision Award in the category of Soldering – Auxiliary for its TMT-R9800S Solder Robot. The award was presented to the company during an April 24, 2019 ceremony at the Shanghai World Expo Exhibition & Convention Center during NEPCON China

Thermaltronics Introduces New Sample Program Offering Free Trials

Feb 19, 2019 | Thermaltronics USA have announced a new sample program for companies interested in a trial of their range of soldering systems and tips.

Thermaltronics Receives Second Award for Full Vision Soldering Robot at APEX

Jan 30, 2019 | Thermaltronics USA, Inc. announced that it was awarded a 2019 NPI Award in the category of Soldering – Other for its TMT-R9800S Solder Robot. The award was presented to the company during a Tuesday, Jan. 29, 2019 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO. The NPI Award marks the second award for the solder robot since its introduction.

Thermaltronics to Run Live Demos on Full Vision Soldering Robot at APEX

Jan 07, 2019 | Thermaltronics USA announced plans to exhibit in Booth #3049 at the 2019 IPC APEX EXPO, scheduled to take place Jan. 29 - 31, 2018 at the San Diego Convention Center in CA. The company will be running live demos of its award-winning solder robot. The success of the TMT-R9800S Solder Robot has driven the development of a larger “in line” version that will be launched later in 2019.

14 more news releases from Thermaltronics USA, Inc. »

Benchtop Fluid Dispenser

TWEEZER-VAC ELITE Vacuum SMD Tweezer Kit