Scheugenpflug Inc.

Producer of bonding, dispensing and potting solutions with outstanding expertise in automation. As part of the Atlas Copco Group, we have a worldwide sales & service network and access to the Group's extensive technology portfolio

Manufacturer

Scheugenpflug is a world-leading producer of premium bonding, dispensing and potting solutions with outstanding expertise in automation.

Our portfolio of products and technologies includes everything from high-performance material preparation and feeding systems to advanced systems for atmospheric and vacuum potting. We even offer modular inline and automated solutions tailored specifically to customer requirements. Scheugenpflug’s dispensing systems are used throughout the automotive, electronics, telecommunications, medical engineering, and power supply industries.

As part of the Atlas Copco Group, Scheugenpflug has a global presence with a worldwide sales and service network and access to the Group’s extensive technology portfolio. Customers throughout the world therefore benefit from innovative solutions to help them overcome the challenges of industrial production.

Website: https://www.scheugenpflug-dispensing.com/en

Scheugenpflug Inc. Postings

14 products »

Feed system for viscous media - PailFeed 803

Material feed systems delivering viscous media to the dispensing unit have to operate reliably, cleanly and bubble-free while meeting the growing demands for speed, sustainability and economy. The PailFeed system ensures that medium to high-viscos...

Dispensing

Feed system for viscous media - PailFeed 803

LiquiPrep LP804 TT preparation and feeding unit

Harnessing gravity LiquiPrep variant uses gravity for high-viscosity materials The higher the viscosity of a material, the greater the demands it places on its preparation and feeding in d...

Dispensing

LiquiPrep LP804 TT preparation and feeding unit

High Performance Dispenser - DosP DP2001

The DosP DP2001 piston dispenser provides a solution for the industry requirements of Automotive Electronics, Industrial Electronics, Medical Electronics and Consumer Electronics for the shortest cycle times and highest dispensing qualities. It al...

Dispensing

High Performance Dispenser - DosP DP2001

Dos GP Gear Pump Dispenser

Rugged, fast and consistent – even with high inlet pressures Dos GP systems are the first choice for applications requiring 1C, high viscosity, unfilled, non-abrasive potting material, making them the best cho...

Dispensing

Dos GP Gear Pump Dispenser

Low Volume Piston Dispenser - DosPL DPL2001

The Allround Solution for Low Volume Applications Whether bonding, sealing, filling or heat dispensing, their simple, robust design makes piston dispensers the systems of choice for many different tasks. They also cover a...

Dispensing

Low Volume Piston Dispenser - DosPL DPL2001

Dos P-X Multi-Piston Dispenser

Ultimate performance with a small footprint Multi-piston dispensers are used for the output of large batch quantities and for short cycle times. These systems can pot several workpieces in a single potting cycle. They a...

Dispensing

Dos P-X Multi-Piston Dispenser

DispensingCell DC803

Scale UP your performance! The DispensingCell DC803 is a new high-performance multifunction cell for demanding dispensing applications. The cell was specially designed for series production with short cycle times an...

Dispensing

DispensingCell DC803

LiquiPrep LP804 Material Preparation and Feeding Unit

Pump UP your material quality! There’s no denying it: Electronic components have to work. An optimal dispensing performance as well as an absolutely homogeneous and bubble-free material are the prerequisites f...

Dispensing

LiquiPrep LP804 Material Preparation and Feeding Unit

A280 with TCA head

For highly viscous, abrasive, and filled materials in straight walled 5 gallon buckets or 20l pails.  Coupled with our special TCA metering head is designed for thixotropic Thermally Conductive Materials with higher viscosities.  Low sys...

Dispensing

A280 with TCA head

Cartridge Expulsion Unit A90 CV

Up to 90 Percent Less Material Waste per Cartridge Change Scheugenpflug has further developed the proven material feeding unit for dispensing applications with high viscosity materials and low media consumption: Th...

Dispensing

Cartridge Expulsion Unit A90 CV

See all products from Scheugenpflug Inc. »

21 technical articles »

How to optimize dispensing processes

Mar 20, 2024 | Scheugenpflug

Effective and reliable dispensing is based primarily on process technology that has been perfectly set up for the specific project. Anyone tasked with planning dispensing systems and responsible for the processes should know the principles and key factors involved so that the dispensing processes can be successfully implemented in cooperation with system and material partners. This White Paper explains the relevant aspects of process technology and provides valuable practical tips....

Inline Quality Control and Position Detection in Dispensing Systems

Feb 06, 2024 | Scheugenpflug

Quality monitoring for verifiable, high-precision application of adhesives and sealants now begins with detecting the position of the component. Dispensing systems are in continuous use and have to work with 100 percent accuracy. And this level of accuracy must be verifiable. Demands on electronic components continue to escalate as these components also need to operate continuously and flawlessly, especially in the automotive and medical sectors. At the same time, there is increasing pressure to automate as companies are looking to achieve the shortest possible cycle times and maximum output....

High-precision dispensing technology: Potting technology for medical wearables

Jul 27, 2023 | Scheugenpflug

Diabetes affects many millions of people worldwide. New technology for real-time glucose measurement replaces the usual unpleasant pricking of a finger: a sensor located in the subcutaneous tissue of the diabetes patient measures the glucose values and transmits them to a receiver. Production of such medical wearables calls for high-precision dispensing systems for applying very small amounts of UV adhesives to medical PCBs and for integrated system concepts to achieve this. A perfect task for Scheugenpflug....

Potting-optimized component design

Feb 15, 2023 | Scheugenpflug

With regard to potting, the design of electronic assemblies and components has a significant impact on economical and sustainable production. Key aspects in this respect are pottability, material use, cycle times, quality and the process technology needed. Optimized, bubble-free potting contributes greatly to the function and longevity of products. It is best practice during the design and development phases therefore to follow the potting tips contained in this White Paper....

Dispensing Thermally Conductive Materials

Sep 29, 2022 | Scheugenpflug

Electronic vehicles, devices and components must not overheat, otherwise they may fail to operate correctly. Thermal management is a major technical challenge as components are getting smaller, power densities are increasing and demands on robustness and reliability are becoming more stringent. To prevent power losses or defects resulting from overheating, liquid thermal interface materials (TIMs) are being increasingly used to dissipate their heat. This White Paper discusses the aspects that need to be taken into account when dispensing these mostly highly viscous, highly abrasive materials and why in many cases they are better alternatives to pads, tapes and foils....

Innovative process for sealing contours protects sensitive components

Sep 08, 2022 | Scheugenpflug

Liquid seals in the automotive industry have to meet high functional quality standards and have to be applied in the shortest possible time in view of the high volume of workpieces. This market environment gives rise to innovations that guarantee maximum speed and quality from initial design to final results....

Resource-efficient adhesion and potting technologies in electronics manufacturing

Aug 02, 2022 | Scheugenpflug

Saving resources in electronics manufacturing is not an end in itself. It is closely linked with reducing costs and gaining a competitive advantage. However, innovative adhesion and potting technologies in combination with highly functional adhesives and potting media make a significant contribution to the ideal union between economic performance and a reduced ecological footprint....

Maximal Performance Through Vacuum Potting

Jul 28, 2021 | Scheugenpflug

The performance of electronic components is compromised by factors such as bubbles in the potting medium. Increasing numbers of applications – particularly in the automotive and electronics industries – therefore require completely bubble-free dispensing methods. This is where potting in a vacuum comes into focus. The widespread school of thought about this technology is that it is too complicated, too expensive and too slow. But a closer look shows that this view is incorrect. This is a mastered technology. As for costs, the calculation basis is key, since usually the potting and vacuum method is only considered after the required potting quality cannot be achieved reliably any other way. Under total cost of ownership assessments, higher system costs no longer play a key role, since component failure would result in much higher subsequent costs. And now there are proven solutions for high production volumes and/or shorter cycle times. This whitepaper explains when potting in a vacuum is ideal for your projects and what to be aware of....

Selective protection for PCBs

Feb 18, 2020 | Scheugenpflug

Glob Top, Dam and Fill & Flit Chip Underfill To protect PCBs from damaging outside influences, they are coated with a thin layer of casting resin or protective finish during the conformal coating process. In addition to sealing the entire circuit board, it is possible to pot only sections or individual components on the substrate. Different methods ranging from "glob top" to "dam and fill" and "flip chip underfill" have been developed for this purpose....

Process Engineering - Why is preparation of adhesive bonding and potting materials necessary?

Feb 14, 2020 | Scheugenpflug

To meet the steady increase in technical requirements for electronic components, potting media properties must be extremely precise. Rheology, viscosity, filler content and curing behavior are only a few of the factors that play a role in their practical use. However, the growing complexity of materials often negatively impacts the ability to process or dispense them. In this case, material preparation and feeding systems specially designed for this purpose are required. These systems optimally prepare the material for the actual application and ensure homogeneous feeding to the dispensing system....

11 more technical articles from Scheugenpflug Inc. »

16 news releases »

Three times more space for innovation

Mar 20, 2024 | At the company headquarters of Scheugenpflug GmbH on a site of almost 10,000 square meters Atlas Copco is constructing an Electronics Competence Center to handle the technologies involved in electronics manufacturing. By 2024, this supplier of premium dispensing solutions will have three times more space for innovation in the fully sustainable and architecturally ambitious building.

Innovations at Scheugenpflug once again prove its market leadership in automated dispensing technology

Jul 06, 2023 | Scheugenpflug, part of the Atlas Copco Group, is stepping up the pace to retain its position as the market leader in the face of international competition. This specialist company in automated dispensing is meeting the ever-present demand for shorter throughput times and once again bringing innovative ideas and solutions to the market. With its system solution consisting of a new high-speed linear-axis material handling system and high-performance dispensing unit, the subsidiary of global player Atlas Copco has achieved a four-fold increase in speed. Atlas Copco also sets itself high targets for CO2 savings throughout its product portfolio. Customers and partners of Atlas Copco have been the first in the world to experience technology models and new systems at TechDays at the headquarters of Scheugenpflug, part of Atlas Copco, in Neustadt/Donau, Bavaria.

Atlas Copco is investing in a sustainable Electronics Competence Center in Neustadt an der Donau

Dec 15, 2022 | At the company headquarters of Scheugenpflug GmbH on a site of almost 10,000 square meters Atlas Copco is constructing an Electronics Competence Center to handle the technologies involved in electronics manufacturing. By 2024, this supplier of premium dispensing solutions will have three times more space for innovation in the fully sustainable and architecturally ambitious building.

Driving Automation: Scheugenpflug adds an inspection system to its portfolio

Feb 22, 2022 | Quality monitoring as an integral part of the dispensing cell saves time and space

Bonding Coverlens Touchsensor Fronts - Innovative plant technology to speed up the manufacturing process

Jan 05, 2022 | Following the everyday operating habits of smartphones and tablets, the control units of industrial plants are now equipped with touch screens. The Siemens plant in Amberg is a multiple award-winning location where around 5,000 employees manufacture Simatic and Sirius products for the automation industry using state-of-the-art production technology. This also includes operating and monitoring devices for industrial applications in logistics and mechanical engineering. In line with its claim to be an innovation location, the site decided to install a Scheugenpflug dispensing system to bond Coverlens Sensor Fronts for industrial plant control displays.

Two trailblazing dispensing solutions for the electronics markets

Nov 15, 2021 | Performance leap in dispensing speed and for the smallest quantities - Scheugenpflug presents two trailblazing dispensing solutions for the electronics markets at productronica 2021

Virtual TechDay - June 29, 2021

Jun 11, 2021 | Join us to our 1st Virtual TechDay on June 29th, 2021. Registration is free.

New DispensingCell DC803: Highest performance in series production

Jul 17, 2020 | Scheugenpflug offers a new, powerful cell solution for demanding dispensing tasks. The DispensingCell DC803 was specially designed to meet the requirements of industrial series production with high quantities and short cycle times. It can be flexibly adapted in scope of features and degree of automation and can be used both as a stand-alone and inline variant.

Scheugenpflug is now part of Atlas Copco

Jan 17, 2020 | Scheugenpflug AG is now part of the Swedish industrial group Atlas Copco. The closing of the purchase agreement took place on January 2, 2020, after the competition authorities had also approved the planned acquisition. The existing Managing Board of the dispensing technology specialist is strengthened by Olaf Leonhardt as new Chairman of the Managing Board.

Scheugenpflug AG becomes part of Atlas Copco

Oct 25, 2019 | The specialist for adhesive bonding, dispensing and potting technology will be part of the Atlas Copco Group in the future. Scheugenpflug will be integrated as an independent company into the "Industrial Assembly Solutions" (IAS) division of Atlas Copco.

6 more news releases from Scheugenpflug Inc. »

SMT feeders

Win Source Online Electronic parts