Universal Genesis 11s calibration gives wrong spindle height

Views: 8088

I have finally got a calibration kit for my single beam mult... - Apr 29, 2023 by Poly  

Do you have to have at least 1 nozzle on the head? I think t... - Nov 16, 2023 by DWL  

I would ensure a nozzle is fitted to spindle 1, UIC genesis,... - Nov 20, 2023 by Carl_P  

Check pin mirrors and the z touchdown sensors are responding... - Nov 20, 2023 by Tom  

Turns out I cleaned the pin mirrors and then did the rest of... - May 01, 2024 by Poly  

Poly

#89273

Universal Genesis 11s nozzle collision even when no nozzle in sp | 29 April, 2023

I have finally got a calibration kit for my single beam multi function Genesis. Calibration finishes successfully, I then attempt to pick a part with the 7 spindle head and it gives me a collision error. The error occurs even when I don't have a nozzle in the spindle, so no collision has occurred. Any ideas on fixes?

reply »

DWL

#90229

Universal Genesis 11s nozzle collision even when no nozzle in sp | 16 November, 2023

Do you have to have at least 1 nozzle on the head? I think the lightning heads you had to have at least 1 nozzle on the head or it would give an error.

reply »

Carl_P

#90241

Universal Genesis 11s nozzle collision even when no nozzle in sp | 20 November, 2023

I would ensure a nozzle is fitted to spindle 1, UIC genesis, Fuzion etc can be a bit funny with this.

If that checks out ok, I would be ensuring nothing is obstructing the Z travel.

Next would be to ensure the Z motor is at home & again this is working as should, When did it last have maintenance etc was it put back correctly & so on.

Those would be my starting points. UIC are still supporting this machine so you can even send them the debug file if you cant read the MCCu screen etc.

reply »

Tom

#90242

Universal Genesis 11s nozzle collision even when no nozzle in sp | 20 November, 2023

Check pin mirrors and the z touchdown sensors are responding correctly.

reply »

Poly

#90925

Universal Genesis 11s nozzle collision even when no nozzle in sp | yesterday at 01:24 PM

Turns out I cleaned the pin mirrors and then did the rest of the PM steps and fixed it... regular PM is important!

reply »