New Equipment | Test Equipment
Koh Young KY8030-3 3D Inline SPI component Range: 01005 PCB size:350x330mm Dimension:1000x1335x1627mm weight:800kg Product description: Koh Young KY8030-3 3D Inline SPI, component Range: 01005, PCB size:350x330mm, Dimension:1000x1335x1627mm, weight:
New Equipment | Test Equipment
Koh Young KY8080 3D SPI Min component: 01005 PCB size:350x330mm Dimension:1000x1335x1627mm weight:600kg Product description: Koh Young KY8080 3D SPI, Min component: 01005, PCB size:350x330mm, weight:600kg, Dimension:1000x1335x1627mm Koh Young KY808
Electronics Forum | Thu May 31 11:07:23 EDT 2007 | pjc
ICT and AXI are two different methods for MDA. ICT checks component values and polarity- component and circuit electrical testing while AXI checks solder joints- volume, voids, bridging, etc.... Typically, AXI is in the SMT process engineering and QA
Electronics Forum | Wed May 09 03:29:16 EDT 2001 | Eyal Duzy
Yes, your observation is accurate. Different process steps have different inspection requirements which necessitates employing different imaging technology to ensure the best performance (detection and throughput). Orbotech, for example, offers both
Used SMT Equipment | Pick and Place/Feeders
FEATURES ▶Higher productivity and quality with printing, placement and inspection process integration▶For larger boards and larger PCBs up to a size of 750 x 550 mm with component range up to L150 x W25 x T30 mm▶Higher area productivity through dual
Industry News | 2012-01-10 19:04:25.0
Zuken announces a new version of Board Modeler Lite that offers significant productivity enhancements during board layout design.
Industry News | 2019-05-31 08:50:57.0
Non-destructive testing of 3D packages with scanning acoustic microscopes identifies defects down to sub-micron level for 100% inspection, failure analysis
Technical Library | 2023-11-20 17:30:11.0
Summary for today 1. Electronic component inspection and failure analysis. 2. Component counting and material management. 3. Reverse engineering. 4. Counterfeit detection. 5. Real-time defect verification. 6. Computed tomography (CT) techniques and how to differentiate between 2D, 2.5D, and 3D x-ray inspection. 7. Design for manufacturing (DFM) and design for x-ray inspection (DFXI). 8. Voids, bridging, and head-in-pillow failures in bottom terminated components (BTC). 9. Artificial Intelligence and x-ray inspection
Technical Library | 2021-09-29 13:35:21.0
In PCB circuit assemblies the trend is moving to more SMD components with finer pitch connections. The majority of the assemblies still have a small amount of through hole (THT) components. Some of them can't withstand high reflow temperatures, while others are there because of their mechanical robustness. In automotive applications these THT components are also present. Many products for cars, including steering units, radio and navigation, and air compressors also use THT technology to connect board-to-board, PCB's to metal shields or housings out of plastic or even aluminium. This is not a simple 2D plain soldering technology, as it requires handling, efficient thermal heating and handling of heavy (up to 10 kg) parts. Soldering technology becomes more 3D where connections have to be made on different levels. For this technology robots using solder wire fail because of the spattering of the flux in the wires and the long cycle time. In wave soldering using pallets the wave height is limited and pin in paste reflow is only a 2D application with space limitations. Selective soldering using dedicated plates with nozzles on the solder area is the preferred way to make these connections. All joints can be soldered in one dip resulting in short cycle times. Additional soldering on a small select nozzle can make the system even more flexible. The soldering can only be successful when there is enough thermal heat in the assembly before the solder touches the board. A forced convection preheat is a must for many applications to bring enough heat into the metal and board materials. The challenge in a dip soldering process is to get a sufficient hole fill without bridging and minimize the number of solder balls. A new cover was designed to improve the nitrogen environment. Reducing oxygen levels benefits the wetting, but increases the risk for solder balling. Previous investigations showed that solder balling can be minimized by selecting proper materials for solder resist and flux.
ITW EAE, the Electronic Assembly Equipment division of ITW is introducing an innovative new twin-nozzle developed by the Vitronics Soltec team for the ZEVA Selective Soldering System. The 3D-Twin-Nozzle™ has two nozzle diameters combined in one
1200MM/1500MM Online SPI , Big Size Solder Paste Inspection Machine mail: sales@smtlinemachine.com whatapp/wechat:+8613537875415 Specification: 技术参数/Parameters 技术平台/Technology Platform super big size platform 适用
The Industry Requirement for 2D and 3D Inspection Technology in a Single AOI Platform SMTnet Express November 21, 2012, Subscribers: 26000, Members: Companies: 9045, Users: 33968 The Industry Requirement for 2D and 3D Inspection Technology in a
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/trimming-heels-under-the-component-body_topic12_post3020.html
. The solder never wanders under the component package to create a solder bridge regardless of the pin pitch value. At our last IPC-7351C meeting at IPC headquarters in Bannockburn, IL, Dieter Bergman presented the question "What proof did we have that there was ever a problem with pads (lands) under components
Lewis & Clark | https://www.lewis-clark.com/shop/page/4/
: 13.5″ x 22″ Smallest Component Capacity: 0201 Components Largest Component Size: 1.96″ Square Body Placement Accuracy: ±0.001″ (0.025mm) Max Placement Rate: 3000 cph Fine Pitch Capability
winsouce.jpg)
