Industry Directory | Manufacturer
AIM is a leading global manufacturer of solder assembly materials for the electronics industry.
New Equipment | Solder Materials
Sn63/Pb37 Electropure™ is a high purity alloy that is composed of 63% tin and 37% lead. Electropure is alloyed in a proprietary method that results in a low drossing, high wetting solder. The Electropure process reduces suspended oxides in the solde
New Equipment | Solder Materials
Made for high speed leaded assembly. No Clean Solder Paste, Alloy: Sn63/Pb37, Type 3 Powder -325+500, 250 gram jar. Buy one or two jars on line. While supplies last.
Electronics Forum | Tue Dec 02 13:01:11 EST 2008 | floydf
Does anyone know if it possible to use Sn63/Pb37 paste on a board with Sn100 finish. Any thoughts on this will be greatly appreciated.
Electronics Forum | Wed Jan 30 08:30:33 EST 2002 | seto
Hello Dave, Mechanically the conection between the component pad and PCB pad is good (the solder joint is very strong). The problem is associated with poor contact after the use by the customer (vibration, temperature, etc). You can see the pictures
Used SMT Equipment | Soldering - Wave
Operating System: Windows based Details: • Dual pot-Lead and Lead Free • Includes full pot of Lead Free –SN100C solder and Lead SN63/PB37 solder • Carbon Steel Solder pots with high temperature protective coating • A
Used SMT Equipment | Soldering - Wave
Electrovert Vectra Elite solder wave. 480 V / 3-Phase / 55 KVA / 60 Hertz - Computer controlled automatic wave solder system - Factory Lead Free machine - Quick Change Solder Pot INCLUDES (1) leaded Sn 63/PB37 and (1) lead-free SN100C solder P
Industry News | 2018-10-18 09:42:39.0
SMT reflow oven process principle and introduction
Industry News | 2018-12-08 03:24:24.0
RoHS Guide in Electronics: RoHS, WEEE and Lead-Free FAQ
Technical Library | 2007-11-15 15:54:44.0
At the contractor level once a product is required to be soldered with lead-free solders all the processes must be assessed as to insure the same quality a customer has been accustomed to with a Sn63Pb37 process is achieved. The reflow, wave soldering and hand assembly processes must all be optimized carefully to insure good joint formation as per the appropriate class of electronics with new solder alloys and often new fluxes.
Technical Library | 2015-02-12 13:32:52.0
Market forces, particularly legislation against the use of lead in electronics, have driven electronics manufacturers towards lead-free solders for PCB assembly and rework. This approach creates challenges because of the relatively high temperatures needed for lead-free soldering. Additionally, lead-free solder alloys typically do not wet or wick as easily as Sn63Pb37 leaded types. As PCBs often include both BGAs and simpler discrete devices, a lead-free rework capability should include a suitable soldering station and a BGA rework station. This article shows how such equipment can be adapted to overcome the lead-free issues and provide a successful reworking facility.
Blackfox Training Institute, LLC | https://www.blackfox.com/should-you-use-lead-or-lead-free-solder/
. When you look at a spool of leaded solder, the numbers next to Sn and Pb, like Sn63/Pb37, indicate how much tin and lead is in that solder
| http://etasmt.com/cc?ID=te_news_industry,5361&url=_print
: alloy composition must be non-toxic. 7, Hhas a good wettability. 8, Good physical properties (strength, tensile): alloy must be able to to provide Sn63/Pb37 attainable strength and reliability, and not by the device on the projection angle welds
.gif)
