New Equipment | Board Handling - Storage
Double Faceplug Stackable PCB Transport Racks for up to 50 Printed Circuit Cards of up to 12.9" (330 mm) are made of antistatic material. Side plates can be adjusted from 3.2" (80mm) to 9.8" (250 mm). Available with PCB stop rods which can be mounted
Fuji SPLICE FEEDER of XP142/XP143 XP142, XP143 non-stop splicing tape feeder 8 * 2, 8 * 2 tape, tape 8 * 4, 8 * 4 Tape FUJI GXD0560 BOLT FUJI GXD0570 JOINT FUJI GXD0580 SLIDE FUJI GXD0660 BLOCK FUJI GXD0670 COUPLING FUJI GXD0690 BLOCK (L) 1-70
Singulate Straight Tab Routed Panels Store cut tabs inside tool for discarding at operator convenience Available with 3 blade types and choice of support dies Clean cut - requires no rework for deburring PCB edges Easy blade change in under 5 m
New Equipment | Cable & Wire Harness Equipment
Low Cost Table Top Crimp Machine. The C 200 is a table top low cost crimp tool which takes a variety of dies from different manufacturers. Air operated using standard factory air (5 bar min), with a pressing capacity of up to 1,200 kp, this portable
New Equipment | Rework & Repair Equipment
BEST HotDots™ are designed to simply and cleanly attach jumper wires on a board. HotDots™ are built to survive at high temperature as both the adhesive and the polyimide material are designed to withstand wash and reflow temperatures. HotDots™ are a
20Mb/s in USB interface). All analog inputs of VIBDAQ X+ can accept ICP(R)(4.7mA power current) and voltage mode transducers.When ICP(R) input mode is selected, open and shortsensor/line circuit is tested. Analog Channel Extension The VIBDAQ X+ offe
New Equipment | Fabrication Services
PFC designs, manufactures and assembles fine line flex circuits. 50 micon line and space is done in production on a daily basis. 37.5 microns done for prototoypes.
SMT special splice tape Features: 1)tape size:4.8mm*40mm+6mm*40mm 2)Available for 8-24mm carrier tapes 3) Suited for paper carrier tapes 4) High efficiency joining is accomplished without hutting off the machine 5)The raised dots on the clear
New Equipment | Component Counters / SMD Counters
Power source: AC220/110,50HZ,25W Counting scope: - 99999--99999PCS Outlook size: L470*W300*H180mm Weight: 10KG The SMD material belt type components are all suitable Expects the band pulley diameter: Any size is all suitable Expects the b
New Equipment | Component Programming
The vibratory plate can be design as your required, and you can also chose our design engineers' recommed the appropriate automatic vibratory plate! If you have any other question Please feel free to contact us! |Tel: 86-0512-65071187-808| Fax: 86-0
