Electronics Forum | Fri Aug 26 16:28:27 EDT 2011 | fredc
I have a copy of the Juki catalog "e" and it shows the 750 capable of 0201s but not the 760. We have several customers that get 149s from us to place 0201s. We have also made a custom 101 with one small hole for several machines that would not re
Electronics Forum | Fri May 27 11:14:20 EDT 2005 | jdumont
Looking at the data for the 3748 material it says its only heat resistent to 79 C. Im going to go with the 3779 instead because of the higher temp rating (149C). Thanks JD
Electronics Forum | Tue Feb 22 04:29:29 EST 2000 | Gwen Z
First I apologize for my poor English writing. we have no heat sink fins and active cooling with power module. when the board is transported,the vibration of board and power module will shotten the solder joint lifetime. if we just solder it withou
Electronics Forum | Fri Mar 25 05:33:18 EDT 2011 | Nigel, RAKON
We have the occasional solder fine but the main issue I have is with small - large balls of solder around an 0402 capacitor. Our LF paste data sheet states a %rH of 25 - 70, I have recorded an average for March of 14.9 - 38.5 %rH. Every other requirm
Electronics Forum | Wed Aug 24 12:10:20 EDT 2011 | atgservice
Hi All I need some advice , hope you guys can help. Is Juki KE750 able to mount 0201 components? Well, according to the nozzle catalogue, there is a special nozzle ( No. 149 ) which is smaller in diameter than the Nozzle 101. It says that this noz
Electronics Forum | Fri Feb 18 21:34:36 EST 2000 | gwen
We always have big power modules on the board,they are very heavy,so we use the screw to fix the soldered module,then we destroyed the solder joints.If we screw them first, the board can't be wave soldered. My questions: whether we should use the s
Electronics Forum | Mon Apr 19 08:56:22 EDT 1999 | Andreas Foehrenbach
| Hello. | | I'm now investigating the current technological issues | on surface mount devices. | For example, I want to know the limitation of | the surface mount machine. | | Where can I get the materials for this purpose? | | Thank you | Hy
Electronics Forum | Sat Feb 19 05:07:28 EST 2000 | Dean
I'm not exactly sure of your problem...but I'll give it a shot. I assume the screw is on the solder side of the board. If you wave solder the screw the head will fill in with solder. Try a water solouble mask or peelable laytex mask over the screw
Electronics Forum | Wed Apr 10 22:23:48 EDT 2002 | davef
IPC-6012A, 3.4.1 has words to the effect of: Hole size tolerance and hole pattern accuracy shall be as specified in the procurement documentation. Our fab says: Standard Drill Sizes Drill Number ||Hole Size ||Finished Hole Size 70 ||0.028" ||0.02
Electronics Forum | Wed Apr 10 22:24:30 EDT 2002 | davef
IPC-6012A, 3.4.1 has words to the effect of: Hole size tolerance and hole pattern accuracy shall be as specified in the procurement documentation. Our fab says: Standard Drill Sizes Drill Number ||Hole Size ||Finished Hole Size 70 ||0.028" ||0.02