Electronics Forum | Thu Dec 15 07:28:38 EST 2016 | emeto
Hello experts. Can anyone tell me how to force part to go to Hydra heads on MYDATA machines? I have MY200DX. Especially interested in Electrolytic caps placement.
Electronics Forum | Wed Mar 30 19:37:17 EDT 2022 | jzeivel
I have an MY200DX mycronic pick and place machine. I recently started getting this error "F-MOT-MOVENICE HYDRA Theta2/1295: Encoder Signal is noisy". Has anyone else ever had this error? The machine will still run, but this error will pop up rando
Electronics Forum | Thu Jan 05 12:33:30 EST 2017 | rgduval
If you haven't resolved this yet, I think you're going to want to go to either the part or the package (I'm not sure which one off hand), and make sure that the hydra heads/tools are selected for placement. You'll also want the vision set to the lin
Electronics Forum | Mon Jun 10 07:44:47 EDT 2002 | pjc
Petroferm Hydrex DX and Zestron Vigon A200 works well to clean Alpha UP78 paste.
Electronics Forum | Thu Sep 05 18:15:15 EDT 2002 | pjc
There are chemistries out there that will solublize some post-solder NC flux residues. I have had success with Zestron material Vigon A200 and Petroferm material Hydrex DX. Go to http://www.zestron.com and http://www.petroferm.com These are chemical
Electronics Forum | Wed May 22 08:43:40 EDT 2002 | pjc
I have experience cleaning NC for military boards. The reason for cleaning the NC is due to conformal coating requirements. Zestron Vigon A200 and Atron AC 100, as well as Petroferm Hydrex DX have both been effective at cleaning Alpha UP78 NC paste.
Electronics Forum | Wed Dec 05 17:48:58 EST 2001 | Mike Konrad
There are a few good de-fluxing chemicals and many more �not-so-good� de-fluxing chemicals. As a manufacturer of cleaning equipment, it is imperative that our customers use a de-fluxing chemical that: #1: Removes flux #2: Is environmentally safe
Electronics Forum | Mon Mar 19 21:55:23 EDT 2018 | stephenj37824
You've got (to my mind) 3 wholly different > classes of machine there. > > Essemtec is upper > entry level maker that is increasingly > differentiating itself from the competing > machines in its class by focusing on 3d > assembly/dispensing op
Electronics Forum | Tue Aug 23 03:29:37 EDT 2022 | samhe
I received a buck-boost DCDC board with an optical sensor from NextPCB, so I mounted the components and measured the efficiency. Table of contents Board received from NextPCB Solder paste printing Mounting of parts Reflow operation check Attaching
1 |