Electronics Forum | Wed Oct 25 21:39:16 EDT 2023 | heinar
Hi, i not found bios battery...
Electronics Forum | Thu Oct 26 16:16:40 EDT 2023 | heinar
Thank you!
Electronics Forum | Thu Oct 26 10:48:17 EDT 2023 | bobpan
It depends on the motherboard that you have. Some dont have a battery but have a Dallas BRam chip. Bob
Electronics Forum | Fri Apr 05 01:34:09 EDT 2024 | ddfreeze
the F1 bios menu thing did not work no matter what options I chose. The fix is to do the mod to the CMOS chip, or gamble on a substitute replacement.
Electronics Forum | Wed Apr 03 09:12:11 EDT 2024 | hta1979
You have to enter the setup utility.Power off the machine,connect AT keyboard to the rear port, power on,press f1, load the bios setup defaults, enter the hdd parameters,in the first menu (Standard CMOS setup) (Cylinder,Head,Sector,Wprecomp) save the
Electronics Forum | Sun Oct 21 22:05:01 EDT 2018 | srini1904
Hello, We have Dek 248 Icon i2 semi auto screen printer. This machine was not in use for long time and Bios battery was dead. We replaced Bios battery and now date are correct. Issue is its not communicating to control board. Suspecting Bios setti
Electronics Forum | Mon Jan 03 14:38:42 EST 2011 | leemeyer
I had this problem awhile back and it turned out to be a problem with the computer Bios settings. The battery had gone dead and the settings were set back to the default state. Luckily I have 2 of these machines and was able to reset the Bios configu
Electronics Forum | Thu Dec 11 02:24:37 EST 2014 | vladicac
We found out what was the problem. If you happen to get the same error be sure to check if you have access to all COM ports. Also check CMOS battery. Because of low battery voltage all BIOS settings were lost. Because of that we had to reconfigure ou
Electronics Forum | Thu Sep 03 02:25:07 EDT 2020 | thanhctran30
Check the backup battery. My KE2020 experienced the same symptoms and its was caused by bad backup battery. I unplugs the power source from the battery and plugs direct to the AC outlet and the machine working fine. Ordered 2 replacement batteries on
Electronics Forum | Tue Oct 04 03:36:23 EDT 2016 | oxygensmd
Today we replaced the HDD to another one. The old HDD is in working condition that is why we can make a new copy-backup from that. We realized that the BIOS didn't see the HDD sometimes. Now we adjusted the BIOS to the right setup, replaced the batt