Electronics Forum | Fri Oct 21 08:19:15 EDT 2005 | Jim
We are experinecing adhesives left on the boards after running taped boards for placement verification on NPI. We've been using 3M double sided (333) tape for over 15 years. Any other suggestions on a good tape to use? This may be a quality issue
Electronics Forum | Tue Jan 14 13:18:15 EST 2003 | russ
We utilize our distributor(s) Contact East, Hisco, Future, Arrow, etc.. for our needs. There are a multitude of manufacturers for this tape (3M, Dewal Ind.,etc...) so, you need to find out waht you like and dislike for this magic tape. Some manfs. ha
Electronics Forum | Tue Dec 27 09:22:05 EST 2016 | sumote
If this topic is not in line with this forum then please feel free to remove it. Let me start by sating I am a 3M fan. There has not been a 3M product that I have ever thought that I was not happy with the way it preformed, and I have used many 3M
Electronics Forum | Tue Jan 14 16:18:06 EST 2003 | Dave F
I have very good luck for several aplications with 3M Kapton supplied by Fralock. Dave
Electronics Forum | Wed Oct 10 12:22:08 EDT 2001 | Kevin
Cal, There are several suppliers of cover tape materials that do not require heat to activate the adhesive. 3M and Advantek are likely the leaders. There are relatively few T&R machines that can handle both heat and non-heat applications - as Chri
Electronics Forum | Mon Feb 28 20:17:02 EST 2000 | Eldon Sanders
I need to side mount a standard HC-49/U crystal on a board using double sided foam tape. I am looking for a source for pre-cut foam tape. In prototype runs I have used 3M #4950 foam tape cut to size one at a time. But for production I want it pre-
Electronics Forum | Mon Feb 28 20:17:02 EST 2000 | Eldon Sanders
I need to side mount a standard HC-49/U crystal on a board using double sided foam tape. I am looking for a source for pre-cut foam tape. In prototype runs I have used 3M #4950 foam tape cut to size one at a time. But for production I want it pre-
Electronics Forum | Thu Nov 15 11:30:17 EST 2007 | mt396596
Could anyone recommend an esd safe masking tape for conformal coating that does not use a silicone based adhesive? I have looked into 3M's 7419 series and am awaiting samples, curious if there is another brand out there people have used. Thank you
Electronics Forum | Wed Mar 01 16:55:55 EST 2000 | Dave F
Eldon: From you description, I think 3M makes the stuff you�re talking about. They can give you a source to kiss-cut it to your requirements. Good luck. Dave F
Electronics Forum | Wed Mar 01 16:55:55 EST 2000 | Dave F
Eldon: From you description, I think 3M makes the stuff you�re talking about. They can give you a source to kiss-cut it to your requirements. Good luck. Dave F
