Electronics Forum | Tue Feb 25 15:28:07 EST 2020 | SMTA-Alex
TPSys is the machine operating system, proprietary from Mydata (Mycronic, now). It's based on Linux. You have to purchase the upgrades from Mycronic. Depending on which version you're upgrading from, the cost might vary. If the machine you're buying
Electronics Forum | Thu Apr 27 23:42:36 EDT 2006 | ajca20
Well the first thing you should know is once Mydata comes out with a new version, the older one is done. We have upgraded to the 2.4.4 and it it was well worth it. We increased our speed because the Agilis LM magazines are faster. Mydata always adds
Electronics Forum | Mon Mar 06 10:54:22 EST 2006 | fredericksr
We have also had some of the same problems, but at the risk of sounding redundant, we have had success in using both the 8mm and 16mm tape clips to secure the tape. We have also been very pleased with the adjustable 16mm feeder doing a job the regul
Electronics Forum | Fri Jan 07 19:36:21 EST 2005 | Grant
Hi, Yes, when we load new reels we cut off the end of the tape, just long enough so we can make sure the whole tape will feed out the back of the machine as it starts to feed. We have the Agillis TM1218 feeders, and they do have problmes with the
Electronics Forum | Fri Mar 03 04:57:09 EST 2006 | grantp
Hi, Wow, weird seeing this old thread pop up again, and it's weird re reading my old posts, and remembering how frustrated we were with the larger 12 and 16 mm Aggillis feeders that kept sticking. We ended up dumping the MYDATA as it just could not
Electronics Forum | Tue Jan 17 17:28:47 EST 2006 | adlsmt
I would agree that anyone buying a new machine should run boards on it. As well I agree with almost everything you said. We did run boards on a Mydata machine. If we were shorter runs and higher mix I would have bought one. We paid a local comapny a
Electronics Forum | Sat Jan 08 00:47:12 EST 2005 | Grant
Hi, Yes, one of the problems with the MYDATA is the feeders are in groups, but at the same time, they are simple, and don't break. But the new Agillis 12 and 16 mm feeders do jam a bit. It's worse on glued cover tape, while heat bonded cover tape is
Electronics Forum | Mon Oct 24 14:57:09 EDT 2022 | spoiltforchoice
Indeed, back in 2010 or so I had quotes for a MY100 with a Hydra head,as part of that I did get them to run a theoretical build time for one of our own boards. That came back @ just under 7k cph, it was a pretty sensible board with a nice range of th
1 |