Electronics Forum | Mon Jul 17 09:23:52 EDT 2017 | tombstonesmt
We use Omron RNS AOI's for PTH inspection. I believe Koh Young and Omron both have 3D PTH inspection now as well.
Electronics Forum | Mon Oct 03 05:17:50 EDT 2016 | robl
2D SPI? Depending on the focusing height PTH inspection, or PTH solder joint inspection? Strip down if it has a granite slab in and turn into an engineering table for manufactured parts inspection? Stick a router head on it if you are really bored
Electronics Forum | Fri Jul 16 15:22:27 EDT 1999 | SMTASSY
We are currently looking at purchasing an AOI equipment but would like facts from present users of such equipment. Our envirronment is as followed, - Runs from proto to 5000 boards of the same type. - 20% PTH, 60% Mixed (with some BGA) and the rest
Electronics Forum | Thu Aug 08 11:58:25 EDT 2013 | rway
I am not that familiar with the older systems. The software should be supported on both old and new alike unless you are limited by the operating system, but the camera will obviously have a lower resolution and perhaps the filtering is not quite as
Electronics Forum | Thu Feb 18 20:24:37 EST 1999 | Tony
I'm trying to replace the PTH connectors with the SMT connectors in my design, and would like to make sure the SMT connector solder joints are as stong as PTH's. What's the right test to verify that? Is Pull and Shear test is the right choice? Where
Electronics Forum | Thu Aug 17 06:02:37 EDT 2017 | smeissner
Is anyone using an AOI machine for through-hole > checking? We have a need to check post-build on > some PCBs', but there doesn't seem to be any > obvious AOI solution. > > Is there such a beast > available? Check Goepel. They developed a Spec
Electronics Forum | Mon Jul 10 08:24:51 EDT 2017 | philc
Is anyone using an AOI machine for through-hole checking? We have a need to check post-build on some PCBs', but there doesn't seem to be any obvious AOI solution. Is there such a beast available?
Electronics Forum | Thu Nov 05 00:11:11 EST 2009 | shinseimy
Hi, You might be can consider try our brand AOI checker. We are the manufacturer the AOI which located at Malaysia. The programming is very easy to use, and effective on the speed. Furthermore, 2D barcode reader, NG marking included. If you are inte
Electronics Forum | Sat Nov 07 14:05:43 EST 2009 | doremi
Hi, I have 4 years as an AOI Process Engineer and we are working with 3 types of AOI - Marantz 22X, VI3000 and Omron (RNS & VT-WIN2). For solder joint inspection (solder meniscus quality, insufficient solder, wetting problems, shorts (bridges) Omron
Electronics Forum | Sun Nov 08 08:58:55 EST 2009 | aliabdul77
Instead of you spend money on AOI,my recomendation will be to install SPI machine ( solder paste inspection machine)since most of your defect are solderability issues.AOI only will ensure no escapee to backend/human escapee but SPI will help to to en
