Electronics Forum | Mon Jan 24 12:28:02 EST 2000 | Michael Bryant
Yes, in an effort to better organize account information, the hit counter has been moved to your Account Manager page. You can access it by following the link on the left of the horizontal, pin-stiped bar at the top or bottom of any page that says "M
Electronics Forum | Thu Apr 11 10:54:34 EDT 2019 | bmalhi
NITROGEN INLET: 2000 CFH ( 56.6 m 3/H R) MAX, 100 PSI (6.9 bar) MAX, 70 PSI (4.8 bar ) MIN For service inquires you can contact Heller by e-mail ServiceNJ@hellerindustries.com or call 973-377-6800 Ext. 5.
Electronics Forum | Mon Jun 19 13:56:59 EDT 2006 | netellink
Bolos, Why you have to purchase the Titanium solder pot for your lead-free? I have the MDS-200 Unit Design Drag solder and I just empty the solder SN63PB37 in the solder pot, clean it very well and buy lead-free solder bar to fill up the pot. David
Electronics Forum | Tue Sep 09 09:02:39 EDT 2008 | floydf
We are quoting a job that has about 30 50 pin D connectors on one side of the board, and about 10 on the other side. Barring any stroke of genius, we would wave solder one side, and hand solder the other side. Does anyone have any suggestions on how
Electronics Forum | Fri Jun 16 14:54:21 EDT 2006 | jbrower
Howdy Bolo, I see. I currently run a 5 zone 1500 Heller, It's a very nice reflow oven and one of my favorites. Hopefully in July we will be getting in our 1700 from Heller. These reflow ovens (used) can be had for a pretty decent price at least in
Electronics Forum | Tue Nov 15 16:57:22 EST 2005 | bk
If your problem is happening part way through the calibration the problem might be there is too much friction from your Y-wagon. Measure the friction on the Y-wagon using the service program if it fails or if it is near the max allowed try oiling up
Electronics Forum | Fri Mar 12 19:09:21 EST 1999 | Jess Baker
Manufacturers who have to mark barcodes onto PCB's without secondary application of pressure sensitive labels can etch it on, screen it on, inkjet it on, use laser marking, or a combination of those. Using a laser marker to write a code into a label
Electronics Forum | Fri Jun 09 12:13:11 EDT 2006 | Chunks
Rob and Pete are both right. "We" had the same problem, with just one manufacturer of the same style QFP (don't want to name names here). We had the same style of QFP from a different manufacture right next to the problematic one on about 3 product
Electronics Forum | Mon Jul 18 00:10:55 EDT 2005 | adlsmt
Price is a pretty big deal also. We used IIt pro frames for about 6 years but moved to QTS Wizard frames, they work pretty well, We have no issues with them not being "Tight" They work from all 4 axes and have "push down" bars as well to work in the
Electronics Forum | Fri Mar 06 14:33:53 EST 2020 | bk
Another thing you can check is where the bar comes down off of the hydra z motor there is a little bearing you can see from the front make sure that bearing is turning even oil it up a little. You can also adjust the tension by loosening the tiny set
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
