Electronics Forum | Fri Jan 13 14:18:41 EST 2006 | mark
Hi, I would like to ask you how you test the PCB (electrical test) of first PCB before starting production.? What kind of equipment you are using? and method to confirm that components on PCB are correct (value, orientation, describtion, polarizatio
Electronics Forum | Fri Jan 13 15:55:07 EST 2006 | DannyJ
Hi Mark, I'm guessing from your letter that you are not asking about traces, just component values. We use a tool called 'smart tweezers' (catchy, eh?) to do jsut what you are asking. Very easy for our QA department to use a BOM to compare agains
Electronics Forum | Mon Jul 25 17:24:25 EDT 2005 | Kris
0.2% lead will make your solder non compliant with RoHS when you move to a completely RoHS compliant BOM. Check with your bar vendor how much it will take to convert a pot containing 0.2% lead to
Electronics Forum | Fri Nov 11 15:04:31 EST 2011 | cnotebaert
Thanks Dave, I had found this in the past, I was looking to see if someone had already developed a straight forward simple program that outlined what needed to be handed to the end customer (well my end customer). we are finding it very difficult to
Electronics Forum | Thu May 11 18:14:17 EDT 2006 | ratsalad
Check out RSI's BOM Explorer. http://www.rsi-inc.com/articles/brochures/bom_explorer.pdf I can't remember if it does BOM to BOM comparison, though. I wrote my own BOM 2 BOM comparison tool for my company. If your BOMs are in a consistent form
Electronics Forum | Tue Sep 06 09:20:04 EDT 2011 | emeto
Thank you dor your inputs! I was also thinking that once we verified the program to BOM and feeders, we shouldnt check to the BOM after palcement, but we should just AOI. Can you see any other weak points?
Electronics Forum | Sun Feb 21 09:02:38 EST 2016 | alexeis
Hi, We have developed solution, called QPlan, that is reading CAD (different formats), merging it with BOM (including check of BOM and compare exceptions), comparing with your history library of Assembleon/Philips, simulating SMT process with automa
Electronics Forum | Fri Jan 19 13:52:01 EST 2018 | heatherc
FactoryLogix from Aegis has this ability. It will also then compare the BOM to CAD in seconds. Some examples of the checks it will do - references missing on either (confirms non-pops), qty on BOM that mis-matches the number of references listed, e
Electronics Forum | Thu Jun 08 20:07:32 EDT 2023 | daniel_stanphill
The answer to this lies within the datasheets of the components on the board. Each component has its own specs as far as number of heat cycles, time at reflow, peak temperature, whether it can be washed, etc. You do not need to be as thorough on th
Electronics Forum | Tue Jun 07 19:05:52 EDT 2022 | duchoang
First Article Inspection is always a MUST in SMT Process. If possible AOI would be added. We also have second operator/inspector to check on pick&place machine setup and use a program printout for inspector to compare/double-check with BOM and the ot
