Electronics Forum | Wed Mar 08 09:32:57 EST 2000 | Dane Stokes
We use loctite to print with before begining testing on printing we asked loctite for the best cleaning solvent for there product. loctite had there own solvent that was designed to break down the propertys of their glue mix. Contact glue supplier an
Electronics Forum | Wed Mar 08 09:32:57 EST 2000 | Dane Stokes
We use loctite to print with before begining testing on printing we asked loctite for the best cleaning solvent for there product. loctite had there own solvent that was designed to break down the propertys of their glue mix. Contact glue supplier an
Electronics Forum | Wed Sep 17 10:17:21 EDT 2003 | jseagle
Check the tant cap for outgassing, tant caps are notorious for breaking wind and moving parts. Try baking the caps.
Electronics Forum | Thu Nov 10 06:00:36 EST 2005 | stepheniii
Break off the break-away? If you are going to fixture the board why not just buy a cutter?
Electronics Forum | Wed Apr 29 17:43:14 EDT 2009 | smt_guy
I have a Product with 2 Different PCB Fiducial allocation in the Design. It has 4 Fine Pitch components. The first PCB DO NOT have Fiducial Mark on the board itself BUT has Fiducial on the Break-OFF Tabs. The second PCB has no Break-Off Tab but has f
Electronics Forum | Mon Jan 24 06:19:04 EST 2011 | fönsi
Hello! I've had the same problem about one Jear ago. We had exessive building of voids in the solder joints. I recomment to take a pincer to break off some of the components. If the solder joint is good, the copper pad will stay at the solder joint
Electronics Forum | Tue Mar 22 03:23:10 EST 2005 | EA
Hi, We are trying to break a component ( SMT component ) off the printed circuit board and measure the quality of the solder joint. But, after breaking off and having the reading, we do not know whether the reading is it within the component specifi
Electronics Forum | Wed Dec 11 11:11:59 EST 2002 | Randy Villeneuve
Lead in pencils is conductive, so if dust or lead particals were to break off (which they could easily do) this could cause shorts on the board, etc. Its common practice not to use lead pencils in electronics manufacturing.
Electronics Forum | Thu Jun 02 14:50:41 EDT 2005 | techknow..
Placement looks good...paste to pad coverage good..correct profile used and verified by tracker. The problem being that this one cap is tombstoning at the same place every time. The placement is central. The part is near the edge at the break off.
Electronics Forum | Wed Nov 09 11:18:39 EST 2005 | Beef Kakes
Cracked components will occur when the component is stressed. The only way to stop this is to not stress the part when removing the score. This can be done by fixturing the board top and bottom so it doesn�t bow when breaking off the breakaway. Vi