Electronics Forum | Tue Jul 11 21:41:51 EDT 2006 | fordf1502004
I am looking for some help and/or guidance. Our company is currently using a panasonic MPAG3 fine pitch machine, we just recently bought a universal conveyor for the downline operation, when I plug the smema cable from the panasonic into the universa
Electronics Forum | Fri Mar 23 22:10:37 EDT 2007 | nalr
Hi all, Could anybody provide me with some circuit diagram that can be used to implement downstream/upstream communication among two smt machines? Thanks in advanced NL
Electronics Forum | Fri Mar 23 23:00:38 EDT 2007 | fastek
It's going to depend on what manufacturer and how old the equipment you are dealing with. It's not as standard as you might think or hope.
Electronics Forum | Sat Mar 24 00:08:55 EDT 2007 | mika
Fully SMPI (there are 2 kinds of SMPI and Universal used them both in the past). Converter cables between SMPI > Fully SMPI Converter cables between FUJI > Panasonic Converter cables between FUJI > SMEMA Converters between almost any machine interfac
Electronics Forum | Tue Aug 27 09:26:59 EDT 2013 | felo188
Hello, I have a problem with SMEMA communication between LSB 03 PCB destacker and DECK 265. Unfortunatelly LSB have 37-pin SMEMA socket. I am trying to make adapter. Based on datasheets of LSB and IPC SMEMA 9851. I tried various combinations but w
Electronics Forum | Wed Oct 20 05:13:24 EDT 1999 | Paul Gerits
Hi Jorge, As you know SMEMA is a world standard (means it is the same at every vendor and each machine), at DEK you can buy (if not already implemented in your printer) SMEMA communication option. This is a pcb which is set in the machine to enable
Electronics Forum | Thu Sep 29 12:04:38 EDT 2011 | swag
You need SMEMA communication beteen your machines and your conveyor.
Electronics Forum | Tue Mar 30 12:10:31 EST 2004 | caldon
SMEMA is not just conveyor height. It also is Conveyor width, Edge Clearance, Tooling pins, Maximun Machine gap, and Lead in of conveyor. Additional, SMEMA is a machine communications Protocol for machine to machine or machine to conveyor communicati
Electronics Forum | Mon Apr 29 01:29:29 EDT 2013 | aemery
If your current problem with the conveyor speed was caused by the SMEMA issue, maybe you have a Board #1 problem. The SMEMA communicates to the computer through Board #1. The input signal from the speed encoder and the output analog voltage to the
Electronics Forum | Mon May 06 10:50:11 EDT 2019 | youngbuck
Hi Kristof, I checked the tacho everything is ok with that, its reading a constant 0 -0 and belt tension looks good. Not sure what else to try. The smema problem is that it will not accept a board from the previous S20. Ive changed smema cables, s
